Construction and other equipment - HD5 steering clutch

Print Page | Close Window

HD5 steering clutch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168153
Printed Date: 16 Jun 2024 at 4:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD5 steering clutch

Posted By: Shaneallis
Subject: HD5 steering clutch
Date Posted: 08 Feb 2020 at 1:57pm

The right steering clutch is locked up on our old Allis HD5. We took all the bolts out of the drum and the instructions we have just say to hook on to the break band and pull it out. We can't get this thing to budge, are we missing a step? Any advice would be appreciated.

Replies:

Posted By: gemdozer
Date Posted: 08 Feb 2020 at 7:36pm

Make sure you have removed 8 bolts from outside flange to the pinion and 10 bolts from inside hub drive and you need approximatif 1/8 inch loosed for pulling the drum assembly sometime you need to knock with a hamer om side drum to make loosed,

Posted By: Shaneallis
Date Posted: 15 Feb 2020 at 4:14pm

Finally got it out, but the teeth are not in good shape. We're probably going to need a new drum if anyone has one or knows where to find one it would be appreciated.

Posted By: Ray54
Date Posted: 16 Feb 2020 at 6:46pm

Gem Dozer you have anything left. Or General Gear in Idaho. A lot of aftermarket parts for steering clutches.

Posted By: gemdozer
Date Posted: 17 Feb 2020 at 7:28am

Yes am still have a new one