175 and 17 Hitch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167800
Printed Date: 18 Sep 2025 at 1:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 175 and 17 Hitch
Posted By: TomYaz
Subject: 175 and 17 Hitch
Date Posted: 27 Jan 2020 at 1:19pm
|
Can a 175 3pt hitch be put on a D17 SeriesIV w/Snap Coupler? Thanks Tom ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: Alex09(WI)
Date Posted: 27 Jan 2020 at 3:11pm
|
YES! I have sold several 3pt hitches off a 175 and 180 tractors that were used to convert a D17 IV to 3pt. ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: TomYaz
Date Posted: 27 Jan 2020 at 4:35pm
|
Thanks Alex! ------------- If its not an All-Crop, it all crap! |
Posted By: HD6GTOM
Date Posted: 27 Jan 2020 at 11:52pm
| I did mine 3 years ago. I had a heck of a time getting 1 lift arm off and had to buy a short 1" air gun to get the bottom bolts out of the tractor. I loved it after it was done. I had an add on 3 point on it when I bought it. The AC unit is far better than any add on. |
Posted By: TomYaz
Date Posted: 28 Jan 2020 at 7:47am
|
Thanks guys. Looking at a salvage 175 this weekend hopefully...happens to have the 400 loader on it that I need for my D17. Also want to get a series IV D17 down the line, might be cheaper to get a SC version and swap out the hitch with the 175. ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 28 Jan 2020 at 7:48am
|
If this works out all I will need is a crankshaft hydro pump for the D17. Anyone got one or do I have top make one? (Lord help us all if I have to do that) ------------- If its not an All-Crop, it all crap! |
Posted By: AaronSEIA
Date Posted: 29 Jan 2020 at 6:58am
|
Get pump drive 1101-0404 off of eBay. That bolts to your crank pulley. Buy the shaft that goes with it. I don't have a number for that as I had the shaft. The pump I have is an Eaton 26013-LZC F140530FM. I got it from Hyd Surplus. Then all you need is the bracket to mount the pump. It looks like this. Good shop can make one if you give them the pump and the distance between the mounting bolts. AaronSEIA  |
Posted By: TomYaz
Date Posted: 29 Jan 2020 at 7:55am
|
Hi Aaron, Good stuff. I found the crank mount you mentioned, but no dice on that shaft#..Anyone have a number? ------------- If its not an All-Crop, it all crap! |
Posted By: Gary
Date Posted: 29 Jan 2020 at 8:08am
|
Recently discussed: https://www.allischalmers.com/forum/help-identify-shaft_topic167648_post1404403.html?KW=#1404403" rel="nofollow - https://www.allischalmers.com/forum/help-identify-shaft_topic167648_post1404403.html?KW=#1404403 |
Posted By: TomYaz
Date Posted: 29 Jan 2020 at 8:47am
The shaft mentioned on that thread: https://www.steinertractor.com/ABC1814-front-hydraulic-pump-drive-shaft?&TF=8EF74A6D4D48" rel="nofollow - https://www.steinertractor.com/ABC1814-front-hydraulic-pump-drive-shaft?&TF=8EF74A6D4D48 Is 10 spline, whereas Aarons hub is 6 spline. ------------- If its not an All-Crop, it all crap! |
Gary wrote:Posted By: Alvin M
Date Posted: 29 Jan 2020 at 9:12am
| Countryside Tractor Has The Parts 717-921-0421 For The Pump Drive |
Posted By: Joe(TX)
Date Posted: 30 Jan 2020 at 6:16pm
|
For the hub http://www.waltstractors.com/acatalog/UF83780----Ford-Tractors--1953-1964---Adaptor-Hub---Replaces-54C2055-171530.html#SID=26542" rel="nofollow - http://www.waltstractors.com/acatalog/UF83780----Ford-Tractors--1953-1964---Adaptor-Hub---Replaces-54C2055-171530.html#SID=26542 for the shaft http://www.waltstractors.com/acatalog/UF83880----Drive-Shaft--13--Long--Replaces-194354-171540.html#SID=26542" rel="nofollow - http://www.waltstractors.com/acatalog/UF83880----Drive-Shaft--13--Long--Replaces-194354-171540.html#SID=26542 These are Ford parts but will work on a D17 Factory setup used a chain coupling with a 10 tooth sprocket. I modified a standard #50 sprocket and shortened the chain. I got these from http://www.surpluscenter.com" rel="nofollow - www.surpluscenter.com I am working on making the plate and spacers. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: TomYaz
Date Posted: 31 Jan 2020 at 5:47am
|
Thanks Joe! ------------- If its not an All-Crop, it all crap! |