Help identify shaft
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167648
Printed Date: 06 May 2025 at 7:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help identify shaft
Posted By: Mikez
Subject: Help identify shaft
Date Posted: 22 Jan 2020 at 6:36pm
|
Hi everyone Have a shaft here. Measures about 15-1/2" long X about 1" diameter and the splines on one end are about 2" long. On a tag is written D-15 loader and I think TS-500. Think it's a front hyd pump shaft  Thanks |
Replies:
Posted By: SteveM C/IL
Date Posted: 22 Jan 2020 at 6:38pm
| Looks like one to me. |
Posted By: Mikez
Date Posted: 22 Jan 2020 at 6:43pm
| Is that a allis part, does it have an allis pt number |
Posted By: Clay
Date Posted: 22 Jan 2020 at 7:12pm
| Not sure but it might be for a front mounted pump. |
Posted By: DiyDave
Date Posted: 22 Jan 2020 at 8:28pm
Could be AC could be from another tractor brand. If it does the job, that's what counts! I have one around here, somewhere, offa ford tractor, that also fits an AC pump mount, IIRR ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Mikez
Date Posted: 22 Jan 2020 at 8:36pm
|
Ok. If it's a AC part I want to label it and make a card for it to locate it in the future. Thanks |
Posted By: Gary
Date Posted: 22 Jan 2020 at 8:50pm
|
Per the Allis Parts Catalog D47 for Series 400 and 500 Loaders: Shaft for Model 415 Loader / D-15: 343285 Gas and LPG for D-15 Diesel and D-14 Gas: 343291 Link to Steiner website: Shaft https://www.steinertractor.com/ABC1814-front-hydraulic-pump-drive-shaft?&TF=8EF74A6D4D48" rel="nofollow - https://www.steinertractor.com/ABC1814-front-hydraulic-pump-drive-shaft?&TF=8EF74A6D4D48 Hub https://www.steinertractor.com/ABC1812-front-hydraulic-pump-drive-hub-adapter?gclid=COLpmMSc2LgCFe9aMgodZmYAuA" rel="nofollow - https://www.steinertractor.com/ABC1812-front-hydraulic-pump-drive-hub-adapter?gclid=COLpmMSc2LgCFe9aMgodZmYAuA |
Posted By: john(MI)
Date Posted: 23 Jan 2020 at 2:06am
|
I don't know if it is, but on the D14 steering column there is one shaft for manual steering and a different shaft for power steering. It's the final shaft that goes into the bolster. One is longer than the other. I can't tell you which is which but it is a definite possibility. The shaft I changed looked very similar to that. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: jaybmiller
Date Posted: 23 Jan 2020 at 7:28am
|
re: ... I want to label it and make a card for it to locate it in the future hahahahaha !  I'm STILL trying to find the 3/8 drive,1/2" deep socket I 'put down to answer the phone in the shop' 5-6 years ago  Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Brian G. NY
Date Posted: 23 Jan 2020 at 10:27am
|
[QUOTE=Gary] Per the Allis Parts Catalog D47 for Series 400 and 500 Loaders: Shaft for Model 415 Loader / D-15: 343285 Gas and LPG for D-15 Diesel and D-14 Gas: 343291 Gary, the D47 parts book says also that shaft #343291 fits all 417 and 517 loaders. It sure looks like the one in the Operator's manual for the 500 series loader for D-17 and D-19 tractors. It also looks a lot like the Ford shaft I bought on ebay for my D-17 gas. That Steiner's shaft appears to have a larger spline than the shaft itself. Here's a picture from the manual and a picture of the Ford pieces I bought..... appear to be the same.   |
Posted By: Joe(TX)
Date Posted: 23 Jan 2020 at 12:14pm
|
The shaft for the D14, D15 diesel and D17 is 13 in. long as is the 3/4 dia. 6 spline shaft Ford shaft. Not sure on the D15 gas. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: Alex09(WI)
Date Posted: 23 Jan 2020 at 1:36pm
|
THE SHAFTS FOR D15, D14, D17 400 LOADERS IS 3/4' DIA. 6-SPLINE!! THE SHAFTS FOR D-SERIES INDUSTRIAL FRONT PUMPS ARE 1" DIA. 6-SPLINE!! THE SHAFTS FOR 170-175 FRONT PUMPS ARE 1" DIA. 6-SPLINE!! Now that that is straightened out, Mike, your shaft is for a D15 Industrial reversed forklift to drive the front pump, which operates the I have a used driveshaft on the shelf that I removed from said forklift 2 months ago. The shaft is 1" dia, and ~15.25" long. I can't find the parts book for that D15 forklift on AGCO, so I don't know the part number. Edit- I believe it would be under the I-60 forklift, NOT I-600
------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: Brian G. NY
Date Posted: 23 Jan 2020 at 4:24pm
Well, ya made me go out in the cold old barn and measure the shaft I have. 13-1/16" long X 3/4" dia. 6 spline......just like Joe says. Good thing there is somebody like Alex who really knows what he's talkin' about! And.......Mike Z, you sure are coming up with a bunch of oddball stuff!! LOL
|
Joe(TX) wrote:Posted By: Mikez
Date Posted: 23 Jan 2020 at 5:04pm
|
Thank you guys. Again. Well I can't ask my grandfather anymore (God rest his soul) but he was good for just sticking random parts in a bin. And he also had been taking parts without marking index card. So we've been going through bins and updateing cards and finding stuff without cards. Thanks guys |
Posted By: Mikez
Date Posted: 27 Jan 2020 at 10:26pm
|
Does anyone have parts book that Alex said to look in. Thanks |
Posted By: Alex09(WI)
Date Posted: 06 Jul 2022 at 10:30am
|
Mike I still haven't been able to track part # for that shaft, but it is for a TS-500 loader front pump. I will send you an email as I am interested in the shaft. ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |