JEOFFROY CHISEL
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167617
Printed Date: 26 Apr 2024 at 9:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: JEOFFROY CHISEL
Posted By: Tad Wicks
Subject: JEOFFROY CHISEL
Date Posted: 21 Jan 2020 at 5:28pm
Hi guys, I have a 22' Jeoffroy chisel that is missing some parts, springs and pivot mounts and a few shanks, anybody parting one out or have parts left over? Thanks Tad
|
Replies:
Posted By: Gary
Date Posted: 21 Jan 2020 at 7:25pm
For those like me that wondered what a 'Jeoffroy Chisel' was:
https://www.ebay.com/itm/ALLIS-CHALMERS-410-PULL-TYPE-CHISEL-PLOWS-OPERATORS-MANUAL-JEOFFROY-MFG-CO-/400614089506" rel="nofollow - https://www.ebay.com/itm/ALLIS-CHALMERS-410-PULL-TYPE-CHISEL-PLOWS-OPERATORS-MANUAL-JEOFFROY-MFG-CO-/400614089506
|
Posted By: SteveM C/IL
Date Posted: 22 Jan 2020 at 10:47am
|
Yeah,the literature from the 60s called them chisel plows but they look like a field cultivator to me.....
|
Posted By: Tad Wicks
Date Posted: 22 Jan 2020 at 3:10pm
Jeoffroy was built in Texas and marketed by AC, we didn't call them chisel plows here we just called them chisels, good tool but the shank pivots and springs are hard to find anymore. They are considerably heavier than a field cultivator.
|
Posted By: jiminnd
Date Posted: 22 Jan 2020 at 4:53pm
I have one I think is late 50s, I think there were different shanks, some solid mounted were rocks were not a problem, some with spring cushion. Just depends on where you are.
-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)
|
Posted By: Mikez
Date Posted: 22 Jan 2020 at 5:59pm
|
Did they use allis part numbers
|
Posted By: Tad Wicks
Date Posted: 23 Jan 2020 at 4:54pm
Mike, each part has a number forged into it, whether is is an AC number or not I don't know.
|
|