Construction and other equipment

Print Page | Close Window

ACE 70 CR forklift

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167489
Printed Date: 05 May 2024 at 11:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: ACE 70 CR forklift

Posted By: BPACH
Subject: ACE 70 CR forklift
Date Posted: 17 Jan 2020 at 8:46am

Hello. I am looking for a schematic for an ACE 70 36 volt electric forklift. I am having a problem with forward drive. After using the truck fork about an hour, the truck stops working in forward, but it still works in reverse. If I turn off the key and wait a couple minutes, it will work again. It may work for 10 minutes or it may work for another hour. The voltage never drops below 36.5 volts. I am wondering if there is a thermal switch in the system somewhere.

Thanks for any advice you can give me. I have been googling, but haven't had any luck. I did not find it on liberatedmanuals.com