Rotary chopper gear box?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167394
Printed Date: 23 Apr 2024 at 12:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rotary chopper gear box?
Posted By: twinsonfarm
Subject: Rotary chopper gear box?
Date Posted: 13 Jan 2020 at 11:55pm
| I need a new gear box for a old Brillion RSS72 72" rotary chopper. Who makes a good quality replacement? Probably needs to be around 40-50hp gear box. Used with an Allis WD45. Thank you, Jim. |
Replies:
Posted By: CaseyCreek
Date Posted: 21 Jan 2020 at 6:36pm
|
I don't know the bolt pattern on that model. Depending on how much modification you are comfortable with, you could have a lot of choices. If you get lucky and have a modern four or six bolt pattern, you could be up and running pretty quickly. Omnigear makes gobs of gearboxes for several rotary cutter manufacturers. Going from memory, the RC 161 is about a 70 hp gearbox that I have seen sell for between 175 to 275 depending on whether or not I needed one at the time :-) try surpluscenter.com. ------------- D17 Series III,D17 Series IV, 185 |
Posted By: DiyDave
Date Posted: 21 Jan 2020 at 9:03pm
get your specs, off the one you have, then check surpluscenter.com... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Phil48ACWC
Date Posted: 22 Jan 2020 at 9:55am
|
https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1311.R4.TR11.TRC1.A0.H2.XBush+Hog+.TRS0&_nkw=bush+hog+gear+box&_sacat=0" rel="nofollow - https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1311.R4.TR11.TRC1.A0.H2.XBush+Hog+.TRS0&_nkw=bush+hog+gear+box&_sacat=0 Click on above and scroll through for ideas.
|