Construction and other equipment - F50-24 fork lift help needed

Print Page | Close Window

F50-24 fork lift help needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=167247
Printed Date: 16 Jun 2024 at 12:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: F50-24 fork lift help needed

Posted By: Jewell1386
Subject: F50-24 fork lift help needed
Date Posted: 09 Jan 2020 at 9:26am

I have a f50-24 forklift I am trying to get a head gasket kit for. Most research I have done pointed to the Buda engine. Order the gasket kit for it from Steiner tractor parts and upon arrival it is not the correct kit. I have a few numbers on the block but am not finding much by searching the numbers. I believe on the side is stamped 45158288 the 7th digit is a ? Any help would be great

Replies:

Posted By: jaybmiller
Date Posted: 09 Jan 2020 at 9:44am

hmm 4 cyl or 6 cyl ?

My FPD50-24 has a BUDA 4BD153( ?) diesel engine in it, same block and most parts as in a Cockshutt '30' gas tractor.

There's cockshut manuals online somewhere.....

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: Jewell1386
Date Posted: 09 Jan 2020 at 9:47am

4cyl I can’t get a pic to load it is to large. All gaskets appear to be correct except exhaust side. I can email pic if you wish

Posted By: Boss Man
Date Posted: 12 Jan 2020 at 12:27pm

Been a while but remember having to go to an Allis dealer because there was 2 different types of manifold gaskets and the kit came with the more common.

Posted By: Jewell1386
Date Posted: 12 Jan 2020 at 3:39pm

You are correct there was a tractor version then an industrial version produced by buda. It is a buda production engine with the industrial head. Manifold gaskets and valve cover gaskets are different. I am trying to find out the industrial kit number then i can find that part of at all possible

Posted By: jaybmiller
Date Posted: 12 Jan 2020 at 8:39pm

'fun' fact. The BD153 engine can have either 3 or 4 rings per piston.the 'fun' part is you have to tear it down to find out...so you can't preorder the parts....

'fun'.

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: Boss Man
Date Posted: 13 Jan 2020 at 8:03pm

Is this a gas or diesel?