Construction and other equipment - Pictures of Accessory pump for Tilt cylinder

Print Page | Close Window

Pictures of Accessory pump for Tilt cylinder

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166896
Printed Date: 19 May 2025 at 3:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Pictures of Accessory pump for Tilt cylinder

Posted By: rhead1
Subject: Pictures of Accessory pump for Tilt cylinder
Date Posted: 24 Dec 2019 at 8:44pm

Does anyone have a dozer with an auxiliary hydraulic pump that is driven by the v belt driving the generator and water pump. I would like to see how and where they installed the bracket that holds the pump. And what the bracket actually looks like. I have a clutch driven hydraulic pump that I will be installing for running a new tilt cylinder for the dozer blade. I have a cylinder off a cat motor grader that I am modifying by installing a stop sleeve on the interior of the cylinder to shorten the stroke. I have all the parts that I need just would like to know how they bolted the bracket to the engine.

Replies:

Posted By: HD6GTOM
Date Posted: 27 Dec 2019 at 4:28pm

What dozers do you have?

Posted By: rhead1
Date Posted: 27 Dec 2019 at 5:32pm

HB6B

Posted By: Mactractor
Date Posted: 28 Dec 2019 at 5:25pm

Have not seen any 'off the shelf' setups but there are many home built ones just like the conversions to alternators from generators. An HD11 man told me keep the factory fitted push start pump I eliminated from my HD11EP as they can be used for powershift logging winches if you put a belt pulley on and make a bracket to mount them up front there. Have not got around to that yet.