Starter on my 190
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166721
Printed Date: 11 Sep 2025 at 3:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Starter on my 190
Posted By: ksbowman
Subject: Starter on my 190
Date Posted: 17 Dec 2019 at 6:19pm
|
The starter on my 1965 190 gas had started to act up and occasionally only the solenoid would click and not engage the starter. As everything does as soon as it got cold and I needed the loader for loading round bales in hay rings it quit altogether. Took it off today and opened it up to check the brushes and it had quite a bunch of chafe ( weed pieces and seeds). Evidently came in the cooling vents over the years. Cleaned out a good handful , checked brushes, cleaned armature and lubed parts that needed it. Replaced it and it starts like a champ. So if you have problems before you replace the starter you might open it up and check for dirt and junk.
|
Replies:
Posted By: DougG
Date Posted: 17 Dec 2019 at 7:23pm
Posted By: DMiller
Date Posted: 18 Dec 2019 at 7:18am
|
Just went thru this on a 180 Diesel, only has the Lucas Starter and no one around here had a Delco interchange unit and no rebuilders working Lucas line anymore. Parts for the OE Lucas are scarce where is cheaper to buy a Korean knock off, could not find a Lucas solenoid for less than $30 also a Korean knock off, with bearings and brushes with a solenoid was cheaper to buy a complete starter.
|
|