7045 Westendorf brackets
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166658
Printed Date: 28 Apr 2024 at 7:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7045 Westendorf brackets
Posted By: bpete
Subject: 7045 Westendorf brackets
Date Posted: 15 Dec 2019 at 11:42am
| Have a 7045 with a ta46 Westendorf loader. Bought loader used & brackets weren't correct, they had to cut the side pa else to fit the loader brackets. Redoing things 11 years later. Curious as if anyone would have the correct brackets laying around. Thanks |
Replies:
Posted By: shameless dude
Date Posted: 17 Dec 2019 at 3:18am
| contact westendorf manuf in Onawa IA |
Posted By: bpete
Date Posted: 17 Dec 2019 at 5:22pm
| * |
Posted By: bpete
Date Posted: 17 Dec 2019 at 5:23pm
|
bpete wrote:Posted By: shameless dude
Date Posted: 18 Dec 2019 at 8:04pm
| they might have a left over sitting around there, maybe go for cheap? |
Posted By: johnkc
Date Posted: 19 Dec 2019 at 8:53am
|
not selling mine but let me know if you need pics ------------- I support the development of hybrid automobiles and alternative fuels as I need DIESEL fuel for my ALLIS CHALMERS! |
Posted By: Unit3
Date Posted: 21 Dec 2019 at 9:33am
|
When I put mine on the 7045, holes had to be drilled for the fuel pump bolts in the right hand frame rail. I would like to know what tractor your brackets did fit. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: SilverBullet
Date Posted: 30 May 2020 at 9:18pm
|
Bpete, Sorry to say that I don't have extra brackets. Do you know how they hooked up the hydraulics for that loader? I have a 7045 with a loader that the hydraulics were not original and I'm having problems getting full pressure, unless I engage one of the remotes. Thank you and I hope that you find your brackets Lennis
|
Posted By: SilverBullet
Date Posted: 30 May 2020 at 9:23pm
|
Johnkc If you have pics and knowledge of how the hydraulics are to be done on a 7045 for a loader I would appreciate it. Thank you in advance Lennis
|
Posted By: MACK
Date Posted: 31 May 2020 at 9:08am
| You need a valve for a closed pressure compensation system and a another line. Your valve may have a plug to change it plus a port for the other line. MACK |
Posted By: Joe(TX)
Date Posted: 31 May 2020 at 10:32am
|
The valve needs to be closed center load sensing. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: Unit3
Date Posted: 31 May 2020 at 10:58pm
|
I got a second set for the 7080. I found them with an ad in the farm Bureau Spokesmen. I had a couple of calls from different farmers. There are some out there. Good luck. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |