Parts
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166278
Printed Date: 25 Apr 2024 at 1:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Parts
Posted By: Chevy4x4
Subject: Parts
Date Posted: 01 Dec 2019 at 8:30pm
Looking for sleeves & pistons for a G230 or G262 engine
|
Replies:
Posted By: dawntreader74
Date Posted: 01 Dec 2019 at 8:45pm
| thank we used chevy- 250 or 292 pistons' you may haft to check it out for wrist pin size. |
Posted By: DrAllis
Date Posted: 02 Dec 2019 at 11:07am
| I'm a little confused, as usual. The pistons and sleeves are similar in design between the G-230 and G-262, but they sure aren't the same. If you put the wrong ones in a given short block, the stroke of the crankshaft is different between the two engines...……….. |
Posted By: Chevy4x4
Date Posted: 02 Dec 2019 at 11:58am
|
Iam talking Allis engines not Chevy. You can put 262 sleeve in a 230 Block but you have to bore bottom of block .020 bigger. I am a Ex Allis mechanic on my own. For any one that wants to put a 8.3cummins in a 8000 series Allis all you have to do is get a 7140 IH flywheel and turn Allis rear plate around and re drill holes. put starter on battery side. and a few other things. I have done 3 so far one is going on 15 years ago no troubles makes a tractor out of them. Get a drive disc made and throw the # torque limiter as far as you can |
Posted By: Chevy4x4
Date Posted: 02 Dec 2019 at 10:01pm
| You can put 262 sleeves in a 230 block if you bore bottom 020 bigger. I really looking for 230 or 262 sleeve & pistons. I will make one or other work if I can find ether one. Some one had a post on here in Wisc. said he had some but I cant find it back. This forum is hard to navigate. |
Posted By: WF owner
Date Posted: 03 Dec 2019 at 5:53am
Try searching for stuff in the forum by using Google. Go to Google.com and type in allis chalmers forum and then what you are looking for. I have had much better luck finding things that way.
|
Chevy4x4 wrote:Posted By: Lon(MN)
Date Posted: 03 Dec 2019 at 6:30am
| I have some 262 pistons and liners. lselkriver@gmail.com |
Posted By: Pfouts Family Farm
Date Posted: 03 Dec 2019 at 8:58am
| I have new pistons and sleeves for G262 and know I have some NOS sleeves for G230. Not sure about NOS pistons for the G230, but I think there are some. I will try to take a look today. pfoutsfamilyfarm@gmail.com |
Posted By: Chevy4x4
Date Posted: 03 Dec 2019 at 8:50pm
| Thank you guys for the comeback All I need is 4 of either set. I will buy how you guys want to sell them. I am trying to overhaul a AC fork lift with a G153 engine. The 230 is the same only a 6 Cly. Can you post how you want to sell. Rings are Available. Thanks again. |
Posted By: Chad (MN)
Date Posted: 04 Dec 2019 at 8:37am
|
I would sell you a non-running G230 engine from a Gleaner....SC Minnesota ------------- 220 3-190XT 2-D19d D19g 5-D17 UC 3-WC 2-WD 3-WD45 CA C H3 7-AllCrops 14-plows 3-Gleaners Lawnmowers SC-equipment |