WD45 head gasket replacement
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166244
Printed Date: 30 Oct 2025 at 8:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WD45 head gasket replacement
Posted By: twinsonfarm
Subject: WD45 head gasket replacement
Date Posted: 30 Nov 2019 at 1:52pm
|
Where to get a good quality WD45 head gasket? Any special coating needed? |
Replies:
Posted By: ryanschott
Date Posted: 30 Nov 2019 at 3:29pm
| I got a felpro head gasket very cheap at Napa. |
Posted By: Sugarmaker
Date Posted: 30 Nov 2019 at 4:15pm
|
Used the copper coat spray. Worked good. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: twinsonfarm
Date Posted: 30 Nov 2019 at 4:40pm
|
Do you spray both sides or just one? |
Posted By: SteveM C/IL
Date Posted: 30 Nov 2019 at 4:46pm
| I used a dry felpro 10yrs ago on 45.....so far so good . Didn't know u were supposed to coat it? |
Posted By: Sugarmaker
Date Posted: 30 Nov 2019 at 4:56pm
|
I sprayed both sides. Before:  After spray:  Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |