tractor steps
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=166241
Printed Date: 04 Nov 2025 at 6:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: tractor steps
Posted By: Dusty MI
Subject: tractor steps
Date Posted: 30 Nov 2019 at 9:56am
|
I think that it's Great that Mike Noonan makes steps for our A.C. tractors, but I've got to show you guys the one I've made for my D-10, It's my Avatar made of re-bar. I made it that way as I figured it would not retain mud and be slippery. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Replies:
Posted By: Herb(GA)
Date Posted: 30 Nov 2019 at 8:37pm
|
Dusty; Looks Good. How about a photo (or two) of it mounted on your tractor. Herb(GA) |
Posted By: Dusty MI
Date Posted: 01 Dec 2019 at 9:41am
I don't know how to post pictures on here any more. I'll take a picture of it. If someone on here will post it, I'll e-mail it to them. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Herb(GA) wrote:Posted By: shameless dude
Date Posted: 02 Dec 2019 at 7:11am
| I bought 2 sets of steps, put them on my 190XT and on the 180D. what a great difference they made! with my back and legs the way they are, those steps made the job of getting on and off both tractors a Godsend! |
Posted By: john(MI)
Date Posted: 02 Dec 2019 at 8:55pm
|
When I got this D-10 this foot rest/plat form was bent down from the
fender brace and the bolt hole was torn, so I added a heavy angle iron,
after making this step and welding it to the angle iron. Dusty  ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Dusty MI
Date Posted: 02 Dec 2019 at 9:23pm
|
John, Thanks for posting the picture for me. Dusty ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: shameless dude
Date Posted: 02 Dec 2019 at 11:14pm
| that looks good! |
Posted By: john(MI)
Date Posted: 03 Dec 2019 at 1:03am
I know, He said he was gonna make one for me for my D14 for posting the picture for him, but I told him no thanks, cause folks would get confused about the "Dusty" name!  ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: chaskaduo
Date Posted: 03 Dec 2019 at 9:01am
Pretty hard to weld up that bouncing effect to.  ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: Stan IL&TN
Date Posted: 03 Dec 2019 at 9:39am
|
Nice work Dusty!! I added one of Mikes steps to my one-seventy and it is better than sliced bread. ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |