Farm Equipment - Allis B engine rebuild

Print Page | Close Window

Allis B engine rebuild

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165804
Printed Date: 03 Sep 2025 at 10:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis B engine rebuild

Posted By: Levibridge95
Subject: Allis B engine rebuild
Date Posted: 12 Nov 2019 at 8:55pm

I accidentally mixed up the lifter rods in my B engine. Is it terribly important to have them matched up perfectly or will they wear themselves in again to the new position?

Replies:

Posted By: ryanschott
Date Posted: 12 Nov 2019 at 9:02pm

Push rods should make no big deal what spot they are in just have to adjust rocker when all back together. Which you should do even if you had them in the original spots anyway

Posted By: Dick L
Date Posted: 13 Nov 2019 at 5:54am

Not to worry! They will be fine. I have always tossed then into a pail, wire wheeled them and washed them in old fashion degreaser called farm gasoline.

Posted By: Levibridge95
Date Posted: 16 Nov 2019 at 6:21am

Ok. Thanks guys.