HD4 steering clutch?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165466
Printed Date: 27 Apr 2024 at 10:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD4 steering clutch?
Posted By: Tracy Martin TN
Subject: HD4 steering clutch?
Date Posted: 31 Oct 2019 at 7:03pm
|
Who sells new steering clutch flywheels for the HD4? Need two of them.Any help appreciated.Tracy ------------- No greater gift than healthy grandkids! |
Replies:
Posted By: Randaleky
Date Posted: 31 Oct 2019 at 11:45pm
| I use General Gear and machine in Boise Idaho or Illini Construction in Illinois . Aftermarket from General Gear , is also where I get my brake bands and clutch disc . |
Posted By: Tracy Martin TN
Date Posted: 01 Nov 2019 at 2:16pm
|
General gear doesn't offer them.Mine are bad, not worth the effort to repair. Was hoping to find new ones. I can make them, but sure don't want to. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Randaleky
Date Posted: 01 Nov 2019 at 6:16pm
| did you try Illini Construction ? Try Blount in Holboken Georgia . they have good used parts . good prices. sent a pic of your worn out ones please . thanks |
Posted By: Tracy Martin TN
Date Posted: 01 Nov 2019 at 8:10pm
|
Randal, Kevin at Illini is working on finding some. Most used ones have egged holes and register rings. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Randaleky
Date Posted: 01 Nov 2019 at 8:13pm
| post a pic . I am not exactly sure what you are referring to . |
Posted By: Tracy Martin TN
Date Posted: 01 Nov 2019 at 9:21pm
|
Randal, don't have a pic here. It is what the pressure plate pushes the disc against.It is made from cast iron, the brake drum separates fly wheel and pressure plate. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Randaleky
Date Posted: 02 Nov 2019 at 9:06am
| do you need both ? I will look at my spare part and take some pics to send . |
Posted By: Rick
Date Posted: 02 Nov 2019 at 2:46pm
| Tracy...Just to let you know this, I reline brake bands for the crawler tractors and can rebuild the steering clutches as well. I can usually get about any parts you need, as far as new goes, so please keep me in mind. What you're looking for is probably out there as good used or some NOS somewhere, just getting ahold of the right person is the thing. Rick |
Posted By: Randaleky
Date Posted: 02 Nov 2019 at 6:17pm
 uploads/5626/DSCN0955.JPG" rel="nofollow - uploads/5626/ uploads/5626/DSCN0955.JPG" rel="nofollow - uploads/5626/DSCN0955.JPG uploads/5626/DSCN0955.JPG" rel="nofollow - DSCN0955.JPG  uploads/5626/DSCN0955.JPG" rel="nofollow - uploads/5626/DSCN0955.JPG going to try to figure out how to post pics Tracy.
|
Posted By: Tracy Martin TN
Date Posted: 02 Nov 2019 at 7:03pm
|
Randal, that is the flywheel. Mine has egged holes and register ring on back is worn bad. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Randaleky
Date Posted: 02 Nov 2019 at 8:06pm
| you mean the top pic is not what you need. the bottom is the pressure plate right. the only thing left is the ring that holds the clutch and plates and the brake band fits around. correct ? |
Posted By: Tracy Martin TN
Date Posted: 02 Nov 2019 at 8:12pm
|
Randal, yes top pic is correct. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Randaleky
Date Posted: 02 Nov 2019 at 11:08pm
| I think this one needs cleaning good. never sat grooves or out of round bolt holes. they should be easy to find used in good condition. |
Posted By: Marko
Date Posted: 04 Nov 2019 at 9:58am
|
CLICK HERE FOR DETAILS Email steeringclutch@gmail.com for orders or questions. CONTACT OUR OFFICE at 1-208-342-8911 General Gear and Machine, 733 Desert Wind Rd., Boise, Idaho, 83716 US *All prices are in USD & do not include shipping All prices are for new aftermarket unless stated otherwise All OEM part numbers are for references only Here is a link to a place I found. I also have a Parts machine. Hope this helps. MR |
Posted By: Rick
Date Posted: 04 Nov 2019 at 11:13am
|
Tracy...The pressure plate is exactly what I told you it was...it's the same exact pressure plate that came out of the WD45 diesel and is the original 9 spring pressure plate. I can do those... Rick |
Posted By: Tracy Martin TN
Date Posted: 12 Nov 2019 at 6:46pm
|
Rick, can you supply the complete pressure plates? Sent you a PM. Thanks Tracy ------------- No greater gift than healthy grandkids! |
Posted By: Rick
Date Posted: 13 Nov 2019 at 1:52am
| Sent you a message, Tracy... |
Posted By: Tracy Martin TN
Date Posted: 13 Nov 2019 at 9:42pm
|
Rick, sent you pics. Tracy ------------- No greater gift than healthy grandkids! |