Video cracking stalk roll flutes
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165420
Printed Date: 01 Apr 2026 at 1:20pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Video cracking stalk roll flutes
Posted By: Lonn
Subject: Video cracking stalk roll flutes
Date Posted: 29 Oct 2019 at 10:13pm
|
https://youtu.be/tg_NZ3M-sj8" rel="nofollow - https://youtu.be/tg_NZ3M-sj8 ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Replies:
Posted By: Lonn
Date Posted: 29 Oct 2019 at 10:17pm
|
https://youtu.be/0z9LdYi54EA" rel="nofollow - https://youtu.be/0z9LdYi54EA ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Lonn
Date Posted: 29 Oct 2019 at 10:22pm
|
Good news is my dealer got a hold of good flutes and they bolted up without a problem. I even tightened one up way beyond tight just to see if it would break. I am sure the bolts would break first with these latest flutes. Yes, I used all new hardware once I was sure I had good flutes.. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Lonn
Date Posted: 29 Oct 2019 at 10:26pm
|
Here's a pic of one of the shattered ones. Jerry posted a resized pic below. Thanks Jerry. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: SteveM C/IL
Date Posted: 29 Oct 2019 at 10:38pm
| Heat treating is a science....China is not consistent |
Posted By: Lonn
Date Posted: 29 Oct 2019 at 10:51pm
|
I'm sure AGCO was trying a new vendor (probably China). The newest good ones are not shiny and have a recess for each bolt hole like the originals. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Lonn
Date Posted: 29 Oct 2019 at 10:54pm
|
Oh, and CaseIH was having the same trouble with their Earth Metal sweeps. I wonder who makes those? ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: SteveM C/IL
Date Posted: 29 Oct 2019 at 10:58pm
| Cheapest bidder |
Posted By: JC-WI
Date Posted: 29 Oct 2019 at 11:28pm
------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: Mike Kroupa
Date Posted: 30 Oct 2019 at 6:57am
| I just put a set on my 12r30 Hugger from Kooima Co. Did the modification to them. Also installed Calmer Corn Head Deck Plates, new points, chains, sprockets. It made for a noticeable improvement, with less trash intake and far less butt shelling. Good Luck, Mike |