Print Page | Close Window

HD6E For Sale

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164666
Printed Date: 18 May 2025 at 9:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: HD6E For Sale
Posted By: HD6
Subject: HD6E For Sale
Date Posted: 28 Sep 2019 at 3:59pm
I'm retiring from farming and selling my equipment.  I have an HD6E  that's been a good tool for me for the last 10 years that is now for sale.  We've done our share of work on her to keep her running: Radiator re-cored, rebuilt steering brake bands, replaced radiator fan and pully, new starter, new generator and voltage regulator, rebuilt steering clutches, replaced left side track adjusting yoke with new idler wheel guide bars and pins (I had pins made for the right side but haven't installed them), rebuilt the left hand idler wheel flange, new seals in both hydraulic cylinders for the front blade, new blade edge, and a lot of oil changes. Also, I fitted a root rake to the front blade.  She's rough around the edges but a solid runner, I have some videos of her working if your interested I could send them in an email (I couldn't download them to this site).  I installed a fuel shutoff on the tank because when it sits for long periods of time diesel fuel leaks into the crankcase and she leaks gear lube around the rear drive sprockets, the right side is worse than the left - - I just add a little oil before each use. Other than that she starts (usually requires a little starting fluid when cold), runs, charges batteries, and works just fine.  Were located in South Haven, Michigan.  



Replies:
Posted By: NomoreJohnDeere
Date Posted: 28 Sep 2019 at 5:33pm
Nice


It has the shuttle?



-------------
HD3


Posted By: HD6
Date Posted: 29 Sep 2019 at 2:32pm
Good afternoon. Sorry I didn't get back to you sooner.  I'm not familiar with the shuttle option.  I has a four forward speed gears and two reverse speeds. 


Posted By: Ages Cat
Date Posted: 29 Sep 2019 at 8:16pm
The HD6EP would have a reversing transmission or Powershift transmission but not a shuttle which the HD3 and HD4 have.  This machine appears to have direct drive since it is an E model and not an EP.

-------------
Curt Anderson
HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025,


Posted By: NomoreJohnDeere
Date Posted: 29 Sep 2019 at 11:07pm
I was thinking powershift but said shuttle
my hd3 does have a shuttle

too far from me
sharing your price?




-------------
HD3


Posted By: JAT-6021
Date Posted: 17 Feb 2020 at 3:48pm
I know it was a while ago now, but have you sold this machine?


Posted By: HD6
Date Posted: 17 Feb 2020 at 6:37pm
HD6 is still for sale. I've had some offers but they were not enough. It's a really good machine. 


Posted By: JAT-6021
Date Posted: 17 Feb 2020 at 7:00pm
How much are you looking to get for the machine



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net