Print Page | Close Window

A430 corn head divider sheets

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164492
Printed Date: 01 Apr 2026 at 2:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: A430 corn head divider sheets
Posted By: Ben (MI)
Subject: A430 corn head divider sheets
Date Posted: 21 Sep 2019 at 7:55am
On my A430 corn head the divider sheet pins don't quite line up with the holes because I am sure they are all a bit tweaked. To save frustration during harvest I want to drill out the holes just a little bit. Will I regret doing so? Thanks.

-------------
Part time farming with a 1980 7060 and 1984 F3 hydro.



Replies:
Posted By: FREEDGUY
Date Posted: 21 Sep 2019 at 7:20pm
Originally posted by Ben (MI) Ben (MI) wrote:

On my A430 corn head the divider sheet pins don't quite line up with the holes because I am sure they are all a bit tweaked. To save frustration during harvest I want to drill out the holes just a little bit. Will I regret doing so? Thanks.
 
Which "pins" are you talking about? The ones that drop into the "frame" and you pop a hairpin into the hole in the pin? We just "man handle" the offending row unit until the 2 pins line up. Perhaps your dividers are tweaked worse than ours?? We run the same head BTW Big smile . Have a safe harvest !!


Posted By: AllisFreak MN
Date Posted: 22 Sep 2019 at 8:51am
I second what FREEDGUY says. I also run an A430 and with a little friendly persuasion they will go where they're supposed to unless something is majorly bent.

-------------
'49 A-C WD, '51 A-C WD, '63 A-C D17 Series III, 1968 A-C One-Seventy, '82 A-C 6060, '75 A-C 7040, A-C #3 sickle mower, 2 A-C 701 wagons, '78 Gleaner M2


Posted By: Ben (MI)
Date Posted: 22 Sep 2019 at 9:01am
Yes, the pins that hold them in place. I am sure I have something tweaked. Thanks.

-------------
Part time farming with a 1980 7060 and 1984 F3 hydro.


Posted By: SteveM C/IL
Date Posted: 23 Sep 2019 at 10:36am
I wouldn't enlarge them. Fix what's wrong


Posted By: Lonn
Date Posted: 26 Sep 2019 at 7:11am
What SteveM says..... make it easy and untweak them.


-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net