Thoughts/Advice on this D17 & Loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164297
Printed Date: 29 Jun 2025 at 12:00am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Thoughts/Advice on this D17 & Loader
Posted By: TomYaz
Subject: Thoughts/Advice on this D17 & Loader
Date Posted: 12 Sep 2019 at 6:31pm
So I found this online. Is this a 417 loader? Series I D17. It appears the hydraulic oil is stored in a loader pillar?? The hosing looks like a hot mess. Looks like a cylinder is damaged..Can replacements be found easily? Comments? What you think is a fair offer? Dealer wanted <5K....I dont think so.... I really want the loader, will probably resell the tractor.
------------- If its not an All-Crop, it all crap!
|
Replies:
Posted By: 200Tom1
Date Posted: 12 Sep 2019 at 8:44pm
Around here you have a 2500.00 tractor and a 500.00 loader. I've seen them both sell in the past year.
|
Posted By: DSeries4
Date Posted: 12 Sep 2019 at 8:52pm
Yes, that is the 417 loader. To buy that loader complete would cost around $2000 if it looks as good as that one. The hydraulic hoses can be replaced and cleaned up as needed.
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: allisbred
Date Posted: 12 Sep 2019 at 8:56pm
Yes—- that is a 400 series loader. That looks like to much money for that tractor, maybe if it was a series 4 with the AC loader. I have an extra 400 loader that came off a 5040 that I bought to keep around. Not much difference to the 400 loader I have on a 175, just minor fabrication to the engine frame. If you can’t find one to fit the d17 for a reasonable price, let me know. Think I only have about 600$ in it.
|
Posted By: Alberta Phil
Date Posted: 12 Sep 2019 at 8:59pm
I've got a slightly later D17, factory LP with the same loader but in much better shape. Bought it a few years ago for $1500 Cn. for the complete unit. Just needed new rear tires which I already had anyway. I know I got a heck of a deal!!
|
Posted By: DougS
Date Posted: 13 Sep 2019 at 5:29am
You're looking at several $100 to replace the hoses. I presume the loader has a separate hydraulic pump. I don't see any cylinder damage, but one might be leaking at the seals.
|
Posted By: TomYaz
Date Posted: 13 Sep 2019 at 6:35am
Look at the third pic to see the cylinder damage.
Thanks for the replies
------------- If its not an All-Crop, it all crap!
|
Posted By: TomYaz
Date Posted: 13 Sep 2019 at 6:37am
allisbred wrote:
Yes—- that is a 400 series loader. That looks like to much money for that tractor, maybe if it was a series 4 with the AC loader. I have an extra 400 loader that came off a 5040 that I bought to keep around. Not much difference to the 400 loader I have on a 175, just minor fabrication to the engine frame. If you can’t find one to fit the d17 for a reasonable price, let me know. Think I only have about 600$ in it. |
Yes would be interested...Would the loader have the front pump?
Edit.... Uggg my reading comprehension sucks this morning....anyhoo Would the loader have the front pump?
------------- If its not an All-Crop, it all crap!
|
Posted By: TomYaz
Date Posted: 13 Sep 2019 at 6:38am
Alberta Phil wrote:
I've got a slightly later D17, factory LP with the same loader but in much better shape. Bought it a few years ago for $1500 Cn. for the complete unit. Just needed new rear tires which I already had anyway. I know I got a heck of a deal!!
|
Im jealous!
------------- If its not an All-Crop, it all crap!
|
Posted By: TomYaz
Date Posted: 13 Sep 2019 at 6:41am
TomYaz wrote:
Look at the third pic to see the cylinder damage.
Thanks for the replies |
Nevermind, I think thats just a grease stain...
------------- If its not an All-Crop, it all crap!
|
|