3pt adjusting crank
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164166
Printed Date: 18 Sep 2025 at 3:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 3pt adjusting crank
Posted By: Marlyn nwia
Subject: 3pt adjusting crank
Date Posted: 07 Sep 2019 at 9:34am
| The 3pt adjusting crank of my D-15 II frequently scratches the fender in the raised position. Does any one else have this problem? What do you do about it? |
Replies:
Posted By: Ray54
Date Posted: 07 Sep 2019 at 1:31pm
| I have never been so lucky as to have a AC with 3pt. But the 3pt I have used are froze up and don't adjust or they move with vibration. So I have used electric tape,bale wire,or bale twine and tied the handle to not move. But of course for nice restoration you need the spring bail(or what ever the proper term) keeper to hold the crank in place. |
Posted By: DiyDave
Date Posted: 07 Sep 2019 at 5:47pm
bungee cord... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |