Farm Equipment - 190xt transferring oil

Print Page | Close Window

190xt transferring oil

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164149
Printed Date: 08 Oct 2025 at 3:03pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt transferring oil

Posted By: HagerAC
Subject: 190xt transferring oil
Date Posted: 06 Sep 2019 at 7:24pm

I've run into a problem with my 190xt transferring oil from the hydraulic section to the rear end. Im assuming it's the seal on the back side of the power director housing but haven't had a lot of time to look into it yet. It does seem to do it in both high and low range though which is unusual i think. We've done others and it's always seemed they only do it in high range. Anyway i have read that a hydraulic pto can be a culprit of oil transfer and this tractor has a hydraulic pto that is 540 only. Just wondering what causes the oil transfer in the hydraulic pto, and how i can test it. Thanks in advance.

-------------
30+ A-Cs ranging from a 1928 20-35, to a 1984 8070FWA, Gleaner R52

Replies:

Posted By: MACK
Date Posted: 06 Sep 2019 at 8:57pm

Hydraulic pto has nothing to do with PD seals. MACK