Allis-chalmers BTL 14 D
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164094
Printed Date: 19 May 2025 at 12:03pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis-chalmers BTL 14 D
Posted By: Ludo-BE
Subject: Allis-chalmers BTL 14 D
Date Posted: 04 Sep 2019 at 9:00am
Hello. I am new to the forum. My name is Ludovic I live in Europe (Belgium). In my collection I have several farm tractors. Probably unknown brands in the USA 1 Fendt FArmer 103S 1 Hanomag R442 Brillant 1 Massey Ferguson 65 1 Fordson super dexta Here is the presentation.
I own a BTL 14 D allis chalmers and a TL 12. I intend to start the restoration of the BTL 14 D at the beginning of the year 2020.
The last time I drove with 2009 at the end of the day the transmission began to slide in both directions of advancement.
At the time I immediately check the tire but it was well inflated. I guess the problem comes from the converter.
The question I ask myself. Can we still find spare parts?
Thanks to the members who will have taken the time to read my presentation   Sorry for the fault of writing in English. I am doing my best.  
|
Replies:
Posted By: CAL(KS)
Date Posted: 04 Sep 2019 at 12:08pm
I would say that finding a torque converter for that machine is going to be a difficult task especially for where you live. Perhaps your best option would be to see if the converter can be repaired or rebuilt. There are places in the USA that are able to do that but I dont know what is possible in Belgium?
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 04 Sep 2019 at 12:46pm
Thank you for your reply. It is my pencée also that the problem comes from the torque converter. If we also repair the converter in Belgium.
|
Posted By: CAL(KS)
Date Posted: 04 Sep 2019 at 1:49pm
i have a contact in Denmark who works heavy repair for caterpillar, perhaps he could be of assistance if you like.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: DiyDave
Date Posted: 04 Sep 2019 at 6:00pm
Is it a D-14 TLB? If so, then the F/R shuttle lever is on the left. It doesn't have a converter, it has a power director clutch...
A couple pictures would clear up any confusion about what you have...
------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
Posted By: CAL(KS)
Date Posted: 05 Sep 2019 at 7:19am
DiyDave wrote:
Is it a D-14 TLB? If so, then the F/R shuttle lever is on the left. It doesn't have a converter, it has a power director clutch...
A couple pictures would clear up any confusion about what you have... | Now that you say this, you could be correct. I saw tl-12 and was thinking he was talking TL14D. but perhaps it is a tractor loader backhoe? in that case power director would be much easier to deal with than converter in TL loader. but he mentions the tire pressure, which some early models had in the drive line.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 10:08am
Hello. it's a BTL 14D. The lever of the inverter is on the left. And there is a tire that makes the connection between the engine and the transmission.
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 10:18am
The difference between the TL and the BTL D is therefore the transmission? If I understood correctly?
|
Posted By: CAL(KS)
Date Posted: 05 Sep 2019 at 11:11am
is it a similar machine to the TL-12 or is it like tractor with loader and backhoe mounted? like this
or
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 11:12am
On the identification plate that is near the seat. It is indicated : Name: Tractoloader Type: BTL 14D Serie N°: 2021B
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 11:20am
https://eu.ironplanet.com/for-sale/Wheel-Loaders-Allis-Chalmers-TL-14-Wheel-Loader-North-Dakota/1611160?iprefoh=www.ironplanet.com" rel="nofollow - https://eu.ironplanet.com/for-sale/Wheel-Loaders-Allis-Chalmers-TL-14-Wheel-Loader-North-Dakota/1611160?iprefoh=www.ironplanet.com
It's the same as the one in the links I just posted. The difference mine has a continental AEC diesel engine. It has a lever with 4 speeds on the floor. I can not see the picture you publish.
|
Posted By: CAL(KS)
Date Posted: 05 Sep 2019 at 11:29am
OK so doing some research B stands for British so it is a TL-14 diesel
I dont know what transmission this British model has but if it has a forward and reverse lever like TL-12, could be as simple as adjusting the 2 clutch packs? Later american models had allison transmission. yes this will have converter not power director like tractors. sorry i do no know more.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 11:36am
yes it is exactly the one in your book. I try to post an image but I can not do it. Ah so allis chalmers had a production site in England? I do not know if there is a clutch fit. When it broke down, I put it down and did not move it for many years. But I really want to restore it completely. It worked really well. A real pleasure to drive.
thank you for your help it's a pleasure to receive valuable information
|
Posted By: CAL(KS)
Date Posted: 05 Sep 2019 at 11:36am
verify fluid levels and converter charge pump. converter may not be bad, but low on oil.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 11:47am
Okay I would do that when I go back to the workshop
I will come and give you news when I check I will post pictures of the work done on him
|
Posted By: CAL(KS)
Date Posted: 05 Sep 2019 at 11:49am
good luck
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 11:59am
Thank you
The abbreviation KS in your location is Kansas?
|
Posted By: CAL(KS)
Date Posted: 05 Sep 2019 at 12:23pm
yes Kansas USA
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Ludo-BE
Date Posted: 05 Sep 2019 at 12:58pm
Posted By: NomoreJohnDeere
Date Posted: 07 Sep 2019 at 9:03pm
One for sale on Wellington Kansas Facebook Marketplace gas engine
------------- HD3
|
|