Farm Equipment - Looking for a little help

Print Page | Close Window

Looking for a little help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164080
Printed Date: 26 Sep 2025 at 7:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for a little help

Posted By: Darrell G (MN)
Subject: Looking for a little help
Date Posted: 03 Sep 2019 at 7:40pm

Is the power director unit the same on a D-14 as a D-17?

Replies:

Posted By: Gatz in NE
Date Posted: 03 Sep 2019 at 9:05pm

if you look them up in the AGCO parts books, you'll see the difference

Posted By: Matt (Jordan,MN)
Date Posted: 04 Sep 2019 at 1:40am

The D17 has more clutch plates

-------------
Owner of Matt Scott LLC
Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
http://www.mattscottllc.com/

Posted By: jaybmiller
Date Posted: 04 Sep 2019 at 5:42am

makes sense.... more power needs more plates to transfer the energy....

same parts though ?? just curious...

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: Gatz in NE
Date Posted: 04 Sep 2019 at 2:31pm

The PD clutch housing halves on a D14/D15 vs D17 are different.

Again, spend a little time and check the AGCO parts books. You'll be glad you did.

Posted By: Alex09(WI)
Date Posted: 04 Sep 2019 at 10:04pm

The shims are interchangeable (long & short of course), the plates are interchangeable, the pressure plates at each end are interchangable, the brass shift collar is interchangeable, the cast input end housing is longer on the D17, the output end cast housing has a bigger spline for the D17 transmission, vs the D14/D15. Also the # of plates are different between the D14/15 and the D17 but the plates themselves are interchangabel from the D-series power directors-100 series power directors-100 series hydraulic PTO clutches.

Hope that helps

-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY

Posted By: Alex09(WI)
Date Posted: 04 Sep 2019 at 10:06pm

Also the 3 long shifter spacers are not interchangable as they are different length between the D14/15 and D17(longer), the center plates between the shims are interchangeable

-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY