Service manuals
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164074
Printed Date: 26 Sep 2025 at 12:50am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Service manuals
Posted By: Billy Ray
Subject: Service manuals
Date Posted: 03 Sep 2019 at 4:24pm
|
Do we have service manuals on the forum?
|
Replies:
Posted By: Gerald J.
Date Posted: 03 Sep 2019 at 5:14pm
I have g, b, c, ca, and wc shop manuals on my web page at:
http://geraldj.networkiowa.com/Trees" rel="nofollow - http://geraldj.networkiowa.com/Trees
The WC manual is in several large pieces.
In years past I have found these manuals at:
http://grandpas-tractor-site.s3.amazonaws.com/manuals/ac" rel="nofollow - http://grandpas-tractor-site.s3.amazonaws.com/manuals/ac
but I've heard lately they aren't there anymore.
Gerald J.
|
Posted By: Jim.ME
Date Posted: 03 Sep 2019 at 6:32pm
|
There are a few in posts at times, like the ones Gerald offers in his post, but no library of manuals. For the most part you have to purchase service and operator's manuals. AGCO and most others now offer free use of the parts manuals on line. Are you looking for a specific manual(s)?
|
Posted By: Keith50
Date Posted: 04 Sep 2019 at 12:13pm
|
Keith50 Here I have an Old Allis serial # B46300 Is it worth anything ? engine turns fine but the carb is a mess
|
Posted By: Jim.ME
Date Posted: 04 Sep 2019 at 2:03pm
Hi Keith50, Welcome to the forum.
From the serial number it looks like you have a 1940 B. Is your intent here to just get a value, get help fixing it, to sell it, or a combination of these? In any case you will get better exposure if you start a new post rather than hide in a post about service manuals, unless you are looking for a manual for it. If you need a manual scroll up a couple posts in this discussion you will see Gerald J. has posted a link to a copy of the original G, B, C, CA Manual he has on line.
Make a new post in the Farm equipment forum and be clear on what you are looking to accomplish (unless you are looking to sell it then you might have better luck putting it in the Classifieds forum).
Not to be rude but in the end it is worth what someone will pay. People do like Bs. The price range of Bs is $500 to $3000 from what I have seen posted on line, a few even lower and some higher. Some photos, and more info, would help people give you an better idea of value. Tire, engine and sheet metal conditions are important.
Good luck with it.
|
Posted By: Souder01
Date Posted: 07 Sep 2019 at 9:18pm
|
I have the WD and WD45 I can send to anyone that needs them.
|
|