7580 Rear Wiring Harness Routing?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=164071
Printed Date: 22 Sep 2025 at 2:50pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7580 Rear Wiring Harness Routing?
Posted By: GM Guy
Subject: 7580 Rear Wiring Harness Routing?
Date Posted: 03 Sep 2019 at 2:16pm
Hey all,
Working on the 1981 7580, and was curious what the proper routing is for the rear wiring harness? they currently have it dangling down by the hoses above the PTO driveline, and it doesnt look like that is the right way.
I am curious if its supposed to be up top with the remote lever cables?
Any info appreciated, Thanks!
------------- Gleaner: the properly engineered and built combine.
If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help.
|
Replies:
Posted By: CAL(KS)
Date Posted: 03 Sep 2019 at 2:23pm
its been awhile since i have looked but i think that is correct.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: Mike Kroupa
Date Posted: 03 Sep 2019 at 3:04pm
If I recall that's how mine was on my 8550 also. Lots of cable ties are a requirement, if you know what I mean!!!! Good Luck, Mike
|
Posted By: GM Guy
Date Posted: 03 Sep 2019 at 6:29pm
I assume dont let it dangle too loose on the front, if there is any slack pile it up on the back?
The main harness is sitting on top of the transmission, and there is a nice plug where the rear harness ties in.
------------- Gleaner: the properly engineered and built combine.
If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help.
|
Posted By: LB0442
Date Posted: 03 Sep 2019 at 8:32pm
Took a couple pictures of mine. Runs right by the right steering cylinder. Probably missing a wire tie there.
|
|