Snapcopler
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163676
Printed Date: 28 Apr 2024 at 2:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snapcopler
Posted By: 1947WC
Subject: Snapcopler
Date Posted: 16 Aug 2019 at 2:05pm
| What is the correct way to put on a new snapcopler spring repair kit? |
Replies:
Posted By: Gary in da UP
Date Posted: 16 Aug 2019 at 3:17pm
| Not sure , but there is an easy way, and a few hard ways to do it |
Posted By: SteveM C/IL
Date Posted: 16 Aug 2019 at 9:53pm
| you talking snap coupler or lift latches? |
Posted By: 1947WC
Date Posted: 17 Aug 2019 at 11:48am
| Lift latches |
Posted By: CTuckerNWIL
Date Posted: 17 Aug 2019 at 2:55pm
|
Get the old drive in pins out, and you got it made! ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: SteveM C/IL
Date Posted: 17 Aug 2019 at 11:16pm
| Never done this but wouldn't a slide hammer work to pull old pins assuming they still have a head? |
Posted By: 1947WC
Date Posted: 18 Aug 2019 at 11:40am
| Thank you for the information guys. |
Posted By: Tom IA
Date Posted: 18 Aug 2019 at 12:43pm
| I have a slide hammer welded to a vice gripe clamp it on the head slide hammer it plus turn it like to unthread it at same time sometimes have to add heat |
Posted By: 1947WC
Date Posted: 28 Aug 2019 at 3:42pm
| Thank you Tom. |
Posted By: CTuckerNWIL
Date Posted: 28 Aug 2019 at 4:59pm
I have a piece of threaded rod that screws in place of the regular screw on my vice grip. I welded a nut to the one end and have a piece of steel, drilled to slide on the threaded rod. ------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Tom IA wrote: