Print Page | Close Window

D10 Series 3 Timing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163559
Printed Date: 11 Sep 2025 at 12:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D10 Series 3 Timing
Posted By: KD8NGV
Subject: D10 Series 3 Timing
Date Posted: 11 Aug 2019 at 4:28pm
Today I checked the timing.  I saw 3 marks on my flywheel. F25, CENTER, and FIRE.  I have been having some overheating issues, so I wanted to check the timing.  At full bore, warmed up, CENTER was in the window.  I adjusted the Distributor until it said FIRE.  The tractor cooled down some.  Then after checking the manual to install the thermostat I saw to my horror that it is supposed to be timed to F25.  After reading on here it seems they are interchangeable, but on my flywheel they are in very different locations.   Which do I use?

(All the marks are upside down) 

Thanks!

Kevin


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net