Farm Equipment

Print Page | Close Window

Test

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163486
Printed Date: 05 Sep 2025 at 1:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Test

Posted By: Lonn
Subject: Test
Date Posted: 08 Aug 2019 at 11:42am

https://youtu.be/acrYGjMnoo0

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Replies:

Posted By: Lonn
Date Posted: 08 Aug 2019 at 12:10pm

Well that didn't work

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: chaskaduo
Date Posted: 08 Aug 2019 at 12:24pm

Went to YouTube searched the vid title and used that one, it didn't have the =youtu.be on the end of url.

[TUBE]acrYGjMnoo0[/TUBE]

-------------
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp

Posted By: Strokendiesel002
Date Posted: 08 Aug 2019 at 12:35pm

weird - I'm getting the error message "youtube not responding" when trying to hyperlink a video.

For kicks, I tried hyperlinking a regular website and it worked

Posted By: chaskaduo
Date Posted: 08 Aug 2019 at 1:28pm

YouTube (google) is playing games again. They also would like everyone to pay to use youtube.

-------------
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp

Posted By: Lonn
Date Posted: 08 Aug 2019 at 2:28pm

Anyhow that was my R52 last fall.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: JoeM(GA)
Date Posted: 08 Aug 2019 at 2:31pm

Lord knows I'm no farmer, but why do you run at an angle to the row?

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Tbone95
Date Posted: 08 Aug 2019 at 3:02pm

JoeM(GA) wrote:

Lord knows I'm no farmer, but why do you run at an angle to the row?

It makes for more even feeding, especially in more challenging conditions like short beans or beans leaning from wind or whatever.

I don't do it, but that's what they say!

Posted By: Lonn
Date Posted: 09 Aug 2019 at 6:14am

JoeM(GA) wrote:

Lord knows I'm no farmer, but why do you run at an angle to the row?

If you had a Gleaner 300 or 800 series head you'd know exactly why. They don't feed worth a darn. I thought the 820 might be slightly better than the 315 I had on the L2 but I almost think it's worse. I should convert my 315 to fit the R52. After a few mods I did to that head it fed reasonably well. I like combining 20 feet verses 15 but I think my 315 would take more out in a day at this point.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: Brian F(IL)
Date Posted: 09 Aug 2019 at 7:54am

Another reason to combine at an angle is to evenly wear the sickle sections. If you continually run with the rows, 2 or 3 sickle sections are going to be doing most of the cutting as you go down the row, while the other sickle sections are just along for the ride. If you cut an an angle, all of the sickle sections will see some use and provide for more even wear.

Posted By: Pat the Plumber CIL
Date Posted: 09 Aug 2019 at 7:55am

The BTO my brother works for takes beans out at an angle . They claim the sickle bar wears more evenly and lasts longer.

-------------
You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails

1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF.