Farm Equipment - 720 front wheel spindal

Print Page | Close Window

720 front wheel spindal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163425
Printed Date: 05 Nov 2025 at 1:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 720 front wheel spindal

Posted By: Dusty MI
Subject: 720 front wheel spindal
Date Posted: 06 Aug 2019 at 4:52pm

I posted on here, in the past couple of weeks, somewhere here, about a front wheel bearing going out.

Well today I see that the new seal had worked it's way part way out and was not turning with the hub. So I put a bead of Red Theradlocker on the edge that is pressed into the hub and pressed it back into the hub. I'll let it set for the night and see what happens. Hope I don't regret using Threadlocker on it.

Dusty

-------------
917 H, '48 G, '65 D-10 series III "Allis Express"

Replies:

Posted By: CTuckerNWIL
Date Posted: 06 Aug 2019 at 6:24pm

It may not lock it in, but it won't hurt anything. I used to use a ton of Green 680 Loctite when I worked on machine tools and never had a problem getting things back apart when necessary.

-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF

Posted By: TMiller/NC
Date Posted: 06 Aug 2019 at 6:41pm

Have used red thread locker (Loctite) to hold part to arbor in lathe to take a light cut off od, press arbor out hit with emery cloth on inside good to go, no chuck marks on id.