Farm Equipment - 7060 bareback

Print Page | Close Window

7060 bareback

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163357
Printed Date: 05 May 2024 at 6:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 bareback

Posted By: A-C_220
Subject: 7060 bareback
Date Posted: 03 Aug 2019 at 7:16pm

Recently purchased a maroon belly 7060 bareback. I was wondering how many more bareback 7000 series were made or what models were available as a bareback? Thanks!

Replies:

Posted By: Calvin Schmidt
Date Posted: 03 Aug 2019 at 8:18pm

I saw two 7045 barebacks in Australia last year. Can't be many

-------------
Nothing is impossible if it is properly financed

Posted By: 210Postin
Date Posted: 03 Aug 2019 at 8:55pm

Without pto

Posted By: Nathan (SD)
Date Posted: 03 Aug 2019 at 11:28pm

Seen a couple each 7 and 8000 series without 3 pt. But all had PTO.

Posted By: bleeds orange
Date Posted: 04 Aug 2019 at 6:47am

Never seen one. Pictures?

Posted By: 210Postin
Date Posted: 04 Aug 2019 at 7:03am

We have a 7040 wide swing drawbar and no 3pt we got out of Canada

Posted By: A-C_220
Date Posted: 04 Aug 2019 at 7:28am

Ours came out of Western Canada and has the wide swing drawbar and PTO. I'll try getting photos.

Posted By: DrAllis
Date Posted: 04 Aug 2019 at 7:35am

I can't imagine one without a PTO because the PTO drive is what powers the hydraulic/steering/transmission pumps.

Posted By: CDN 400
Date Posted: 04 Aug 2019 at 10:34am

There were almost no tractors sold in western Canada with 3 point hitch regardless of color. Only in the past few years do you see a few new ones on dealers lot with hitch the exception is little utility tractors. So any Allis in the west will have no hitch weather it be a 190 ,7000 or 8000 series so there are a pile and they are not rare like some think.

Posted By: GM Guy
Date Posted: 18 Aug 2019 at 2:25am

We have a 7040 with no 3pt.

-------------
Gleaner: the properly engineered and built combine.

If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help.

Posted By: bleeds orange
Date Posted: 18 Aug 2019 at 7:13am

Pictures!

Posted By: JPG AUSTRALIA
Date Posted: 18 Aug 2019 at 8:23am

99percent sold here were for broad acre/drawbar use ,so no 3 point, but all had pto. I have only seen the odd d21 without pto

Posted By: JPG AUSTRALIA
Date Posted: 18 Aug 2019 at 8:26am

Besides the wide swing drawbar and no 3pt they had heavier cast centres as well