Farm Equipment - 200 drawbar

Print Page | Close Window

200 drawbar

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=163146
Printed Date: 04 Apr 2026 at 6:54pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 drawbar

Posted By: Mikez
Subject: 200 drawbar
Date Posted: 27 Jul 2019 at 8:53am

Hi.
the drawbar is to low and I thought on here you guys have said to put drawbar on top of crossbar. Does anybody have pictures of it like that. Thanks

Replies:

Posted By: AC720Man
Date Posted: 27 Jul 2019 at 9:39pm

I don’t have a picture of mine like that because I only put it on top if I enter a tractor pull. Very simple, remove the bolts that hold the slide plate down(the drawbar slides on it). Slide the roller assembly off the slide plate and flip it up side down, slide it over the drawbar and reassemble with the drawbar on top.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: Mikez
Date Posted: 01 Aug 2019 at 9:22pm

Ok thanks, will give it a try

Posted By: ALLISMAN32
Date Posted: 01 Aug 2019 at 9:51pm

Get a drawbar from a 180 or 185, they will set flat on top of the 200s bail. If you try putting the 200 drawbar on top of the bail it puts it in a bind and only rests on the front side of your bail

Posted By: clarkscreek
Date Posted: 03 Aug 2019 at 11:48am

I noticed that on mine when I tried to put it on top. Thanks I didn't know that about the 180 or 185 drawbar.