Callin ole Chask,,,,,,,beep, beep, beep,,,,
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162584
Printed Date: 24 Jun 2025 at 11:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Callin ole Chask,,,,,,,beep, beep, beep,,,,
Posted By: desertjoe
Subject: Callin ole Chask,,,,,,,beep, beep, beep,,,,
Date Posted: 07 Jul 2019 at 7:55pm
|
Hey Chask,,I got a line on another Massey and need some of yore help id'in a SN of 9A-87999. The ole fellar has no idea what year it is but does know it was yellow from the factory and hAS a front loader. What say ye,,,???  I tried the last link you sent but was a dead end on the To20's,,,,
|
Replies:
Posted By: TMiller/NC
Date Posted: 07 Jul 2019 at 8:11pm
|
desertjoe, TO 20 1952 serial numbers are 72680 to 108644 according to vintagetractorengineer.com, Tim |
Posted By: desertjoe
Date Posted: 07 Jul 2019 at 9:28pm
|
Hey Thanks Tim,,,,,I seen that on one of the many sites I was tryin to ID it,,,but the 9A in front is throwin the guys on the massey forums. The guy texted me a pic to my phone but I cannot get the sob to talk to my PC for CHIT,,,!!! If I hadn't give so freakin much for this phone it would already be history,,,and, and,, I'm too cheap to throw away $800,,,,,
  |
Posted By: chaskaduo
Date Posted: 08 Jul 2019 at 4:07am
|
From TractorData http://www.tractordata.com/farm-tractors/001/0/8/1083-ferguson-to-20.html" rel="nofollow - http://www.tractordata.com/farm-tractors/001/0/8/1083-ferguson-to-20.html Serial number plate location above the TO-20's steering column.  More info http://fergusontractors.org/nfs/wp-content/uploads/technical-articles/Tractor-Identification.pdf" rel="nofollow - http://fergusontractors.org/nfs/wp-content/uploads/technical-articles/Tractor-Identification.pdf http://fergusontractors.org/fena/wp-content/uploads/FerTractorSNs.pdf" rel="nofollow - http://fergusontractors.org/fena/wp-content/uploads/FerTractorSNs.pdf http://www.oldengine.org/members/ferguson/serial_numbers.html" rel="nofollow - http://www.oldengine.org/members/ferguson/serial_numbers.html http://www.oldfergusontractors.com/wp-content/Resources/North_American_Ferguson_Tractor_Production_Serial_Numbers.pdf" rel="nofollow - http://www.oldfergusontractors.com/wp-content/Resources/North_American_Ferguson_Tractor_Production_Serial_Numbers.pdf Now Look At These Serial # http://www.tractordata.com/farm-tractors/000/7/4/743-massey-ferguson-135.html" rel="nofollow - http://www.tractordata.com/farm-tractors/000/7/4/743-massey-ferguson-135.html 1970 135 ? ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: desertjoe
Date Posted: 08 Jul 2019 at 4:50am
|
Well,,,Chask,,,again you came thru,,,!! According to the literature, it is a 1970 Massey Ferguson 135 and I appreciate your efforts,,,, BUT,,, The "deal" fell plumb thru the floor yesterday,,Ya see,,I had put an ad in our Electric COOP monthly for ,,"Wanted To Buy" a Massey Ferguson TO20 "For Parts",,,well,,I got several calls soon as the monthly came out and all of them folks wanting to sell me their "Vintage, Family Favorite Completely Restored" ,,,tractor. I gently told em all the ad was for a " Parts Only tractor for the intake manifold,,,, Al the other calls I have got were all the same thing,,,,BUT,,,No parts tractors or manifolds,,,Chit, Chit,,,,Don't people know how to read any more,,?? Then this guy from northern NM calls and says he gots what I'm lookin for, says he traded for it 2 years ago and has never used it, but engine runs good and wants to trade for a 4 wheeler for his grandson,,,,,,,,So, I mention I gots four (4) 4 wheelers and he is very interested in one of the Polaris Trail Boss 250's and,,,"Will you trade for my tractor?" He does not know nuttin bout the tractor,,except it is a Massey Ferguson with a factory loader and engine runs good. I start smellin a rat when he says engine runs good but ha ain't started it in over two years,,,,?????? He wants pics of the 4 wheeler so I shine it up and send him the pics and he texts back,," I'll trade you straight across". I figure if his engine is complete and "runnin" I may chit can this tractor and go with the one with a loader,,,,then the Rat surfaces and he calls and says he changed his mind and just wants to sell me his tractor for $1400 and no trade,,,,,,,I tell him I'll give him $50 for the intake manifold and he can keep his tractor back behind the barn,,,,Sorry AH,,,,!!!!! Why people gotta be like that,,,????
|
Posted By: chaskaduo
Date Posted: 08 Jul 2019 at 12:34pm
|
No problem here Joe. Sorry your deal went south. Dealing with a beautiful young lass would surely of had a better outcome. Took me a while to find that confounded beeping all night though. I have faith you'll find your quarry. Hang in there. ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: JC-WI
Date Posted: 08 Jul 2019 at 2:31pm
|
" I'm too cheap to throw away $800,,,,,   " For
that kind of money, thet dam thing should be doin everything for you
that you ask... and spittin pictures out to the computor in 8X10
glossies.... an none that half a pic or no pic at all crap like
this... http://allischalmers.com/forum/uploads/242/mz1.jpg" rel="nofollow - http://allischalmers.com/forum/uploads/242/mz1.jpg Now quits that palm chewn an go gets ahold of thet dam phone company and make them untie that phone of yours so it can work fur you... As you wants it to.
------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: chaskaduo
Date Posted: 08 Jul 2019 at 3:39pm
Spoken like a frugal man.  ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: desertjoe
Date Posted: 08 Jul 2019 at 5:08pm
that right there is my man JC,,,,, |
chaskaduo wrote:Posted By: JohnCO
Date Posted: 09 Jul 2019 at 10:50am
|
The guy in Northern NM doesn't have a last name that starts with V, does it? ------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |
Posted By: Michael V (NM)
Date Posted: 09 Jul 2019 at 11:55am
|
John, it weren't me,,,I don't even have a MF on the place,,,now I do have some MH 44's tho.. now if my southern NM buddy finds another here in the north part of NM,, I'd sure be happy to help him go retrieve it..
|
Posted By: desertjoe
Date Posted: 10 Jul 2019 at 5:01am
|
Naw,,John,,,,if it hada been ole Michael,,,he'd a already made sure I had that manifold here and bolted up. The other dude was from outside Tucumcari which is some close to ole Michael tho,,,, Turns out the engine in HIS tractor is a 3 Cylinder Perkins anyways,,,,,Can't imaging a fellar not knowin the difference between a 3 cylinder and a 4 cylinder engine ,,,CHIT,,,even I don't need both hands to get to ,,,,four,,,,
|