Farm Equipment - 6 volt LED bulbs?

Print Page | Close Window

6 volt LED bulbs?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=162071
Printed Date: 15 Jun 2025 at 6:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6 volt LED bulbs?

Posted By: JayIN
Subject: 6 volt LED bulbs?
Date Posted: 20 Jun 2019 at 11:01am

Got my hayride wagon finished. Wired up some LED flashing warning lights for safety. Need to upgrade the lights on the WD45 now. Anybody know of any plug and play replacement bulbs? I have 6v GE1133 right now. Anyone have any experience with this? Thanks in advance!

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Replies:

Posted By: DennisA (IL)
Date Posted: 20 Jun 2019 at 11:26am

I've been using these for years on my CA.
https://www.superbrightleds.com/moreinfo/tail-brake-turn/1156-led-bulb-19-led-forward-firing-cluster-6v-and-24v-dc-car-classic-car-bulb/511/" rel="nofollow - https://www.superbrightleds.com/moreinfo/tail-brake-turn/1156-led-bulb-19-led-forward-firing-cluster-6v-and-24v-dc-car-classic-car-bulb/511/

-------------
Thanks & God Bless

Dennis

Posted By: festus51
Date Posted: 20 Jun 2019 at 6:16pm

I sure did not know they make 6v led bulbs. Learn something new every day.

-------------
We the unwilling Led by the unqualified Doing the impossible for the Ungrateful

Posted By: jaybmiller
Date Posted: 20 Jun 2019 at 6:24pm

White LEDs are actually about 3 volts, so 2 are in series to make 6 volts, 4 for 12. Depending on make/model of LED though some use 3 in series for 12 and a small resistor to limit current. Those good for 6-20 volts probably are run in 'constant current' mode which is how LEDs are supposed to be used.

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: DougS
Date Posted: 20 Jun 2019 at 6:43pm

You can’t merely string 2, 3, or whatever LEDs together to get to a12 volt total. You need a current limiting resistor, regardless of the voltage. In the case of using 6 volts for a 12 volt light, you would need to change the value of the resistor. It’s a little more complicated than just installing a resistor of half the value. You tell me the voltage and current rating of each LED and I can calculate the size of the resistor needed.

Posted By: festus51
Date Posted: 20 Jun 2019 at 8:06pm

wow learned more new stuff

-------------
We the unwilling Led by the unqualified Doing the impossible for the Ungrateful

Posted By: bigal121892
Date Posted: 20 Jun 2019 at 8:19pm

Try these: https://www.digikey.com/products/en?keywords=CL25N3-G-ND" rel="nofollow - https://www.digikey.com/products/en?keywords=CL25N3-G-ND

will operate on 5 to 90VDC, and output .025mA. They are also available in .010mA, .020mA, in both the TO-92 package, as well as SMD.

Posted By: JayIN
Date Posted: 21 Jun 2019 at 9:44am

Looking for a complete plug and play bulb.Just twist it into the socket and go. Dont want to do any wiring or resistors, etc. Keep it simple

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Posted By: DougS
Date Posted: 21 Jun 2019 at 9:51am

Finding something for 6 volts will not be easy. There are LED's out there that can be made to work on 6 volts, but finding a plug and play one might be a problem, at least finding one with 50 equivalent watts or more. Look around. Google. I might be wrong.

Posted By: JayIN
Date Posted: 24 Jun 2019 at 1:30pm

I ordered what DennisA IL suggested. Will report back when they come in and I get them installed.Thanks for the help!

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Posted By: DougS
Date Posted: 24 Jun 2019 at 2:17pm

Make sure your flasher will work with LED's. My sheriff's department got this wild hair that they wanted LED's for their tail and directional lights. Net result: They wouldn't flash unless we installed resistors in parallel with the bulbs. The current draw was too low to perk the flasher. Finding a LED flasher for a 2014 vehicle was next to impossible.

Posted By: Coke-in-MN
Date Posted: 24 Jun 2019 at 2:25pm

LED bulbs are POLARITY sensitive - so you need + or -- ground bulbs . They just don't work without proper polarity . Seems I found out with British motorcycles as they are + ground .
You can find bulbs on AMAZON that will work

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: BigGuy1000
Date Posted: 29 Jun 2019 at 5:52pm

The 1133 white LEDs as posted by DennisA above work fine in any 6 Volt system,either + or - ground, they are what you want, just plug and play!!! Pay no attention to the other posts above, they do not apply to this situation!!!

Posted By: JayIN
Date Posted: 29 Jun 2019 at 7:00pm

I ordered them. Will report back.

-------------
sometimes I walk out to my shop and look around and think "Who's the idiot that owns this place?"

Posted By: CrestonM
Date Posted: 29 Jun 2019 at 9:58pm

I am interested in hearing how it works out! May need to order some myself.