Plow part ???
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161384
Printed Date: 15 Dec 2025 at 10:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Plow part ???
Posted By: Mikez
Subject: Plow part ???
Date Posted: 27 May 2019 at 9:35pm
Hi everybody, need a hand putting a part to a plow. What one of these anchor brackets 328062,330096, or 320338 fits this plow. Can anyone help identify plow Thanks |
Replies:
Posted By: DiyDave
Date Posted: 28 May 2019 at 4:35am
Looks like a 70 series plow, to me. IIRR, 70's had the angled shanks, 80's had angled shanks and a shear bolt... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: PaulB
Date Posted: 28 May 2019 at 5:27am
|
CORRECTION : the 80 series were spring trip with angled shanks and and adjustable width frame. The 70 series were the same frame with shear bolt shanks. Without a good look from the rear, it could also be a 60 series, as they had the angled shear bolt shanks with a fixed width frame. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Gerald J.
Date Posted: 28 May 2019 at 9:38am
|
According to my plow parts book, 328062 fits 60 series 2 or 3 bottom Plows 10" or 12" for B, CA, D, & WD series tractors. 33096 for the pull bar and beaming screw of 70 series 2 bottom plow 12" or 14" and 16" for B, CA, D & WD series tractors. 320338 fits 60 series according to my parts book, 2 & 3 bottom 10 to 16" spacing for B, CA, D, & WD tractors. 320338 also shows up on a single bottom 60 frame 14" and 16" bottoms for D-10 and D-12 tractors. Over in the Knowledge Forum there is an entry titled Plows Parts 101 that includes a link to a downloadable plow frame parts book. Gerald J. |
Posted By: Mikez
Date Posted: 29 May 2019 at 10:24pm
| Yea I had read through that, just was asking to help clarify it. I went back through it. Looks like 60 series and the 320338 should be the part I want. Thanks guys |