Construction and other equipment - HD5 Clutch Parts Needed

Print Page | Close Window

HD5 Clutch Parts Needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161342
Printed Date: 07 May 2025 at 4:26pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD5 Clutch Parts Needed

Posted By: hodaka
Subject: HD5 Clutch Parts Needed
Date Posted: 26 May 2019 at 2:28pm

Hello,

I have purchased an Allis Chalmers HD5 bulldozer. I currently have the engine out and am doing an overhaul. It has a Rockford clutch in it. Does anyone know where I can find Rockford clutch parts? My internet searches have not yielded any results. Thanks

Replies:

Posted By: Mactractor
Date Posted: 26 May 2019 at 3:21pm

General Gear & Machine keep good stocks of dry clutch and brake parts. They have a website.

Posted By: hodaka
Date Posted: 26 May 2019 at 5:12pm

Checked out their website, all I see offered are parts for Auburn clutches.

Posted By: gemdozer
Date Posted: 26 May 2019 at 5:47pm

Let me have part number maybe I can help with ROCKFORD cluch I ben robbed last weeken but could check what parts am still have.

Posted By: Coke-in-MN
Date Posted: 27 May 2019 at 2:07pm

I got some parts from MINNPAR for a clutch a few years back . I have a few used parts but probably not what you need .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: Mactractor
Date Posted: 27 May 2019 at 3:34pm

Sorry to hear scumbags have helped themselves to your stock Hector

Posted By: gemdozer
Date Posted: 27 May 2019 at 5:38pm

I check todays about cluch ROCKFORD and am still havea ring adjusting,1 washer pressure,a ring ,a plate adjusting,a plate back,a sleeve,a plate for the cam,a carrier and maybe some small parts.

Posted By: hodaka
Date Posted: 28 May 2019 at 10:31am

The part numbers I am looking for are 073906- this is the clutch camshaft and possibly a pressure plate part # 078669.

Posted By: gemdozer
Date Posted: 28 May 2019 at 4:26pm

I have the plate and check tomorrow for the cams and comback

Posted By: hodaka
Date Posted: 28 May 2019 at 10:51pm

Thanks everyone for all the help. However I have now found the cylinder head is cracked between the valve seats and injector tube. Looking for a cylinder head or a shop to repair mine

Posted By: gemdozer
Date Posted: 29 May 2019 at 10:51am

I have 3 cams. for the cluch ROCKFORD