Construction and other equipment

Print Page | Close Window

HD-6B Vide o

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161285
Printed Date: 28 Apr 2024 at 3:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD-6B Vide o

Posted By: kblackav8or
Subject: HD-6B Vide o
Date Posted: 24 May 2019 at 6:04am

My HD-6B with bad steering clutches is now repaired. Clutches work perfectly. It runs well, has fresh brake bands. In short it is mission capable. Still have some work to do. The canopy isn't back on yet. Some tubes show freeze damage, we are going to replace those and revise the mounting so it isn't reliant on the fenders at the rear for support. Also need some odds and ends and a paint job. Love to have a Carco winch for it but may substitute a hydraulic Braden. Here is a sort of hastily recorded video before I had to leave for work for 6 weeks. https://youtu.be/Tat3noSI5iU" rel="nofollow - https://youtu.be/Tat3noSI5iU

Replies:

Posted By: NomoreJohnDeere
Date Posted: 24 May 2019 at 8:52am

hard to video and doze at the same time

-------------
HD3

Posted By: Lee Bradley
Date Posted: 24 May 2019 at 5:43pm

I always engage the clutch during start-up and cool down. In fact I only disengage the clutch to shift and pull it right back in.

Posted By: Mactractor
Date Posted: 24 May 2019 at 6:21pm

Good work. Do I hear the turbo howl of a 7000 engine there?

Posted By: kblackav8or
Date Posted: 25 May 2019 at 12:54am

You do hear a 7000 turbo engine. It's a mutt. A 5 roller track frame 65 B model with a AG engine and 5/1 transmission. Has the FARR air cleaner. Not sure where the blade came from but has a Dakota hydraulic system I am told. The nose is more of an AG nose someone built the lift system for. it is well done and sturdy.