Farm Equipment - A.S.A.E. Drawbar Extension

Print Page | Close Window

A.S.A.E. Drawbar Extension

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161245
Printed Date: 22 May 2025 at 8:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: A.S.A.E. Drawbar Extension

Posted By: Randy MN
Subject: A.S.A.E. Drawbar Extension
Date Posted: 22 May 2019 at 9:05pm

Allis made an extension plate (part # 215512) for the B and C tractor drawbars "to make A.S.A.E. Standard Drawbar". Would anyone know if the swinging drawbar meets that standard also?

Thanks, Randy

-------------
34 WC #477, 38 B #1935, 1-116 on steel, #8 7ft dbl action disc, #9 5ft dbl action disc, 295 Chainsaw

Replies:

Posted By: Dakota Dave
Date Posted: 22 May 2019 at 11:08pm

As long as it's pined in the center and not allowed to swing it does. All it does is move the hitch point back so you have 14" from the pto shaft to the hitch point. That standard was agreed upon so you could use other manufactors pto equipment. Other wise it was to costly for third party's to make equipment.