Allis Chalmers D grader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160282
Printed Date: 21 Aug 2025 at 6:40am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers D grader
Posted By: Paul..
Subject: Allis Chalmers D grader
Date Posted: 22 Apr 2019 at 1:21pm
Serial # is D6200 was wondering what year it was and also what tractors they put gas motors in that would be interchangeable ? Thanks
|
Replies:
Posted By: DiyDave
Date Posted: 22 Apr 2019 at 6:28pm
Serial # puts it at '63. My guess would be a D-17 Gas motor of the same vintage should exchange. I have heard it said that there is a difference in the crankshafts, not real sure, so obviously save the old crank... Good Luck, and welcome to the forum...
------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need!
|
Posted By: Paul..
Date Posted: 22 Apr 2019 at 7:48pm
Thanks for info runs great now just thought if I ran across something it’d be worth thinking about
|
Posted By: wn willis
Date Posted: 23 Apr 2019 at 6:37am
Paul, there is a wealth of Model D information on this forum. The members here have been most helpful to me with my model D, ser.#1547
|
Posted By: Paul..
Date Posted: 23 Apr 2019 at 2:50pm
That’s good to know thanks
|
Posted By: Ages Cat
Date Posted: 23 Apr 2019 at 6:02pm
Our machine is D-4997, 1956 vintage and has been shown at the Orange Spectacular and the LeSueur Pioneer Power show the last two years. It is a D Special. My picture posting skills are zip.
------------- Curt Anderson HD3, HD5B, HD6AG,HD6B dozer, I-400,615, 616,620,720,ACP25 lift truck, 1956 D Grader, AC 540 loader, AC #84 plow, Simplicity tractors, Agco MT225, Agco 2025,
|
Posted By: Paul..
Date Posted: 08 Aug 2019 at 8:10pm
Another question was an oil filter it had a Napa gold 1515 but not sure if it’s right
|
Posted By: Dnoym N. S. Can.
Date Posted: 08 Aug 2019 at 8:18pm
- NAPA 1515 replacement filters
-
https://www.oilfilter-crossreference.com/convert/BALDWIN/B2" rel="nofollow -
Baldwin B2
-
https://www.oilfilter-crossreference.com/convert/BOSCH/0451104063" rel="nofollow -
Bosch 0451104063
-
https://www.oilfilter-crossreference.com/convert/BOSCH/OF063" rel="nofollow -
Bosch OF063
-
https://www.oilfilter-crossreference.com/convert/CARQUEST/85515" rel="nofollow -
CARQUEST 85515
-
https://www.oilfilter-crossreference.com/convert/DONALDSON/P550008" rel="nofollow -
Donaldson P550008
-
https://www.oilfilter-crossreference.com/convert/FLEETGUARD/LF3313" rel="nofollow -
Fleetguard LF3313
-
https://www.oilfilter-crossreference.com/convert/FLEETGUARD/LF551A" rel="nofollow -
Fleetguard LF551A
-
https://www.oilfilter-crossreference.com/convert/Fram/PH8A" rel="nofollow -
Fram PH8A
-
https://www.oilfilter-crossreference.com/convert/LUBERFINER/PH8A" rel="nofollow -
LUBER-FINER PH8A
-
https://www.oilfilter-crossreference.com/convert/Magneti-Marell/1AMFL00001" rel="nofollow -
Magneti Marelli 1AMFL00001
-
https://www.oilfilter-crossreference.com/convert/Magneti-Marell/1AMFL00029" rel="nofollow -
Magneti Marelli 1AMFL00029.
B:-) Dnom
|
Posted By: Joe(TX)
Date Posted: 21 Aug 2019 at 7:12pm
Motorcraft FL1
------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
Posted By: SteveM C/IL
Date Posted: 23 Aug 2019 at 1:08pm
That filter suggests it has full flow oiling system
|
Posted By: wn willis
Date Posted: 23 Aug 2019 at 7:47pm
Recently installed electronic ignition on my Model D grader, ser.# D 1549. Much improvement and seems to have more power. Axle seals on the tandem were leaking. Found all bearings damaged, also had to send all 4 axles to the machine shop for repair. Found approx. 3 inches of sludge in each chain case. Cleaned this out, reinstalled axles, bearings, seals, new retainer nuts. Operates like a new machine. Just need to paint it. Nope, no repaint. It`s a working machine.
|
Posted By: wn willis
Date Posted: 09 Sep 2019 at 7:31pm
Looking for a creeper gear for my Model D Grader. If anyone knows of one available, let me know/
|
|