CA Starting video Update
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160281
Printed Date: 09 Apr 2026 at 6:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA Starting video Update
Posted By: DennisA (IL)
Subject: CA Starting video Update
Date Posted: 22 Apr 2019 at 11:54am
|
I had to update the video on starting the CA with 6 volt system. I had stated the battery cable used was a 1/0. This is not the case, the battery cable used is a 2/0. https://youtu.be/qEGXv1_Wklw" rel="nofollow - CA starting Video ------------- Thanks & God Bless Dennis |
Replies:
Posted By: SGTJ
Date Posted: 22 Apr 2019 at 1:09pm
|
So I'm off to pick up a 2/0 cable. (hopefully that'll make my CA turn over easier... fingers crossed) THANKS! ------------- WD , CA |
Posted By: Dave(inMA)
Date Posted: 22 Apr 2019 at 3:58pm
|
I've been keeping a battery maintainer on my CA (6v, + grnd). Not sure whether the battery cable is 1-0 or 2-0, but it's heavy. I polish the ground connection at least once a year. The tractor didn't get much exercise over the winter, but I've started it 8-10 times in the last few days. Spins over nicely and fires right up. Heavy cable, hot battery and good ground make an easy job of it. ------------- WC, CA, D14, WD45 |
Posted By: SGTJ
Date Posted: 22 Apr 2019 at 5:41pm
|
Picked up a 1/0 cable, now it fires up like a champ !! Thanks a ton !!! ------------- WD , CA |
Posted By: DennisA (IL)
Date Posted: 22 Apr 2019 at 6:14pm
Good to hear! Have fun with the CA! ------------- Thanks & God Bless Dennis |
SGTJ wrote: