Print Page | Close Window

2005 Saturn Veu front brakes

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160220
Printed Date: 11 Aug 2025 at 3:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 2005 Saturn Veu front brakes
Posted By: DougG
Subject: 2005 Saturn Veu front brakes
Date Posted: 20 Apr 2019 at 1:29pm
Got a 2005 Saturn Vue and having front brake issues , heres what happened, passenger side front brake caliper stuck one day so replaced the rubber brake line , it had a shimmy when applying the brakes after , and they were wore down so replaced the front brake pads and rotors on both sides, also replaced the wheel bearing assemble as it had a little play too,caliper / brake come on ,relubed the sliding pins ran good for a few weeks and done it again , put a new caliper on it , now it drives great but sometimes out of the blue its like the passenger side brake comes on with a grinding noise then stops after a bit, no ABS light comes on , im stummped !



Replies:
Posted By: chaskaduo
Date Posted: 20 Apr 2019 at 1:43pm
I had a car do that before and ended up replacing the proportioning valve. Your mileage may vary.

-------------
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp


Posted By: DougG
Date Posted: 20 Apr 2019 at 4:28pm
Its got 197000 on it so probably a good thing to replace, or its in the ABS controller thanks


Posted By: fixer1958
Date Posted: 21 Apr 2019 at 7:22am
Does it sound like the ABS pump is coming on when you say a 'grinding noise'?


Posted By: jaybmiller
Date Posted: 21 Apr 2019 at 8:23am
could be a slug of air in the other side brake line.
It took me 6 tries to get AIR the air outta the forklift brakes and that only has 3' of tubing ! A slight bend was allowing the bubble to go back and forth...
sigh.



-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Posted By: DougG
Date Posted: 21 Apr 2019 at 9:36am
No noise from the ABS


Posted By: Dakota Dave
Date Posted: 22 Apr 2019 at 11:31am
You changed the hoses and calipers did you use a tech 2 and bleed the brakes if not your ABS module probably has air in it. It wont cause the ABS light to come on but you wont get a good bleed without comanding bleed mode in the ABS


Posted By: chaskaduo
Date Posted: 22 Apr 2019 at 2:20pm
Gotta love them A$$inine Brake Systems. Wink

-------------
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp


Posted By: DougG
Date Posted: 22 Apr 2019 at 4:37pm
Didn't do nothing like that Dave just bleed them the way I do with others, gotta do some homework!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net