917H
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160036
Printed Date: 29 Apr 2024 at 12:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 917H
Posted By: AC720Man
Subject: 917H
Date Posted: 14 Apr 2019 at 7:44pm
 [IMG]uploads/16194/C316C382-0DC8-45B4-B33E-3519685D3907.jpeg[/IMGFinally got around to checking my diff on my 917H. Not good news as all pinions are chewed up. Even worse news, according to Jacks small engines website, they are no longer available. Anyone have this issue and where did you get parts? Calling SLI tomorrow but would like to reach out to others. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: AC720Man
Date Posted: 14 Apr 2019 at 7:45pm
 Unsure why it didn’t upload the first time. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: ac fleet
Date Posted: 28 Apr 2019 at 12:34pm
|
Thinking a used parts place might be your only option. I still use my 917-h,-- hope it never craps out! ------------- http://machinebuildersnetwork.com/ |
Posted By: AC720Man
Date Posted: 28 Apr 2019 at 8:28pm
|
Sara and Bill at SLI hooked me up with some really nice used pinions. They are no longer available new. Not sure why I have not done maintenance on the differential as the manual recommends. Quite a job but I could do it in my sleep now. Thanks to MikeZ for sending me instructions from a manual he had. They were a huge help. It appeared the grease inside got hard and spun off the gears leaving them with no lubrication. I recommend at least to pull off the right wheel, axle collar, and slide the outside diff carrier off the axle. Check the condition of the grease and the pinion gears. If the grease is not surrounding the gears or appears to be stiff then disassembly will be required to clean out the old grease and repack it. The grease zirk on the outer diff carrier only greases the axle at diff carrier, not the differential itself. My 917H is 36 years old and is still a good mower. It does a lot of mowing so I’m glad she is back together. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |