Farm Equipment - 1951 CA narrow to wide front swap?

Print Page | Close Window

1951 CA narrow to wide front swap?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=159836
Printed Date: 22 May 2025 at 5:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 1951 CA narrow to wide front swap?

Posted By: Hunt4Allis
Subject: 1951 CA narrow to wide front swap?
Date Posted: 10 Apr 2019 at 2:39am

I bought a wide front end and wonder if there's any info out there in regards to how to go about doing this swap out?
I am looking for possible step by step instructions...

Replies:

Posted By: Dick L
Date Posted: 10 Apr 2019 at 11:57am

If you have the CA wide front it is a take off and bolt back on.

First jack up to take the weight off the front wheel from under the torque tube where the wishbone connects.
You remove the hood, the radiator shell, the radiator, remove the nut from the front steering arm and link. You are down to the four bolts holding the bolster to the block.

The wide front can roll under the tractor lining up the wish bone and the four studs in the block. Put back what you took apart and your good to go.

Posted By: Hunt4Allis
Date Posted: 10 Apr 2019 at 1:05pm

Thanks Dick for the info!

Posted By: Dick L
Date Posted: 10 Apr 2019 at 4:40pm

If your a bull like I used to be you can do it yourself. I ran into a situation a time or two that it would have been best to have help. Now I need help to remove the key and put it back in.