Farm Equipment - 45 hand clutch clearance shimming

Print Page | Close Window

45 hand clutch clearance shimming

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=159766
Printed Date: 06 Apr 2026 at 7:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 45 hand clutch clearance shimming

Posted By: SteveM C/IL
Subject: 45 hand clutch clearance shimming
Date Posted: 07 Apr 2019 at 10:04pm

Fixing to adjust the "Rick rebuilt" hand clutch. Have I&T JOKE manual which is useless and an old WD factory service manual (3 ring binder) which says .065-.070. That's a 2 plate and don't know if same for 3 plate. At 70,it don't have much snap and too easily released.Would disengage on the first hard bump. Rick talked like AC manual was very good on detail for what/how. Gerald or someone is always posting links to Grandpas Tractors manuals online or some such but I can't come up with it with my I-net skills. Good help and advise is desired. TIA

Replies:

Posted By: DennisA (IL)
Date Posted: 07 Apr 2019 at 10:22pm

https://youtu.be/1ebh4pRvTiI" rel="nofollow - https://youtu.be/1ebh4pRvTiI

.060”

If the RETAINER, pressure washer is worn it can feel lose.

-------------
Thanks & God Bless

Dennis