Print Page | Close Window

Brinly sleeve hitch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=159520
Printed Date: 26 Apr 2025 at 3:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Brinly sleeve hitch
Posted By: Slowmotion
Subject: Brinly sleeve hitch
Date Posted: 31 Mar 2019 at 3:51pm
I'm looking for a way to hitch Brinly sleeve hitch implements to my 5020. It has a tow bar and 3 pt. hitch. Has anyone done this? Are there adapters available?


Replies:
Posted By: Gary Burnett
Date Posted: 31 Mar 2019 at 4:24pm
Not the cheapest but  buy one of those 3pt hitches made to tow trailers with a receiver then weld  a sleeve hitch onto the hitch part that slides in that would normally have a ball on it.

Posted By: ac fleet
Date Posted: 31 Mar 2019 at 4:47pm
Make your own hitch.----That would be the best way.---There no specific factory adapters that I know of.  Make a simple A-frame on the 3-pt., then add the sleeve hitch to that, and you have an adapter that will use any sleeve hitch equipment. The lift arms would allow adjustment for level or tilt.


-------------
http://machinebuildersnetwork.com/

Posted By: chaskaduo
Date Posted: 31 Mar 2019 at 4:59pm
Hope this helps
Look At:

One of these

https://www.northerntool.com/shop/tools/product_200519383_200519383?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Farm%20%2B%20Acreage%20%3E%203-Point%20%2B%20PTO%20Hardware%20%3E%203-Point%20Drawbars%20%2B%20Stabilizers&utm_campaign=Braber%20Equipment&utm_content=27280&gclid=EAIaIQobChMIiYzFmq6t4QIVaf7jBx1LGgvGEAQYBSABEgJaA_D_BwE" rel="nofollow - - https://www.northerntool.com/shop/tools/product_200519383_200519383?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Farm%20%2B%20Acreage%20%3E%203-Point%20%2B%20PTO%20Hardware%20%3E%203-Point%20Drawbars%20%2B%20Stabilizers&utm_campaign=Braber%20Equipment&utm_content=27280&gclid=EAIaIQobChMIiYzFmq6t4QIVaf7jBx1LGgvGEAQYBSABEgJaA_D_BwE

One of these

https://www.harborfreight.com/5000-lb-capacity-step-bumper-receiver-67158.html?cid=paid_google|*PLA+-+All+Products|All+Products|67158&utm_source=google&utm_medium=cpc&mkwid=sROYldmlw|pcrid|327822404853|pkw||pmt||pdv|c|slid||product|67158|&pgrid=71439424048&ptaid=pla-296227501885&pcid=1688396772&gclid=EAIaIQobChMI1OLUpa-t4QIVmLrACh0qpgHPEAQYAiABEgLYEPD_BwE" rel="nofollow - - https://www.harborfreight.com/5000-lb-capacity-step-bumper-receiver-67158.html?cid=paid_google|*PLA+-+All+Products|All+Products|67158&utm_source=google&utm_medium=cpc&mkwid=sROYldmlw|pcrid|327822404853|pkw||pmt||pdv|c|slid||product|67158|&pgrid=71439424048&ptaid=pla-296227501885&pcid=1688396772&gclid=EAIaIQobChMI1OLUpa-t4QIVmLrACh0qpgHPEAQYAiABEgLYEPD_BwE

and one of these

https://www.amazon.com/Sleeve-Hitch-Adapter-Receiver-Black/dp/B078QTVP37/ref=asc_df_B078QTVP37/?tag=hyprod-20&linkCode=df0&hvadid=309915807046&hvpos=1o7&hvnetw=g&hvrand=6289945630676922421&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9019602&hvtargid=pla-568320713662&psc=1" rel="nofollow - https://www.amazon.com/Sleeve-Hitch-Adapter-Receiver-Black/dp/B078QTVP37/ref=asc_df_B078QTVP37/?tag=hyprod-20&linkCode=df0&hvadid=309915807046&hvpos=1o7&hvnetw=g&hvrand=6289945630676922421&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9019602&hvtargid=pla-568320713662&psc=1



-------------
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp

Posted By: DaveKamp
Date Posted: 31 Mar 2019 at 5:11pm
If it were me, I'd find a piece of 2" thick-wall tubing, make a T, weld pins to the right and left sides, put a pair of tabs for a top pin, then weld two tabs near the bottom to serve as the sleeve pin...

What implement do you have in sleeve that's big enough to hitch up behind the 5020?


-------------
Ten Amendments, Ten Commandments, and one Golden Rule solve most every problem. Citrus hand-cleaner with Pumice does the rest.

Posted By: Dnoym N. S. Can.
Date Posted: 31 Mar 2019 at 5:45pm
http://simpletractors.com/forums/topic/14999-brinly-sleeve-hitch-implements-mount-how/" rel="nofollow - https://simpletractors.com/forums/topic/14999-brinly-sleeve-hitch-implements-mount-how/

        HTH
          B:-)    Dnoym

Posted By: chaskaduo
Date Posted: 31 Mar 2019 at 6:20pm
Corrected my earlier post for the  and one of these

-------------
1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp

Posted By: Slowmotion
Date Posted: 01 Apr 2019 at 12:31am
The only implements I have now are a Ferguson bullet plow that's too big and a 42" Bush Hog with a jammed up drive line. I'm looking for a 1 bottom plow and a small disc, and I occasionally see used Brinly implements online.

Posted By: jaybmiller
Date Posted: 01 Apr 2019 at 6:29am
I made my own,copied one from Ford LGT125 but...Brinly made 3pt implements as well as sleeve hitch. I've got 3pt plow and cultvator for my Sears ST12. Tod bad you're not a lot closer as they're collecting dust.
Check local ads, CL, Gogle search....ask at small engine repair shops, yard sales,etc.
Jay


-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net