Farm Equipment - F&H Spoked wheels

Print Page | Close Window

F&H Spoked wheels

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158393
Printed Date: 19 Dec 2025 at 10:34am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: F&H Spoked wheels

Posted By: R.L.Smith
Subject: F&H Spoked wheels
Date Posted: 21 Feb 2019 at 4:06pm

I have a nice set of F&H spoked wheels. casting number HC46A. I was told they came on early WC. I'D like to know of any other models they may fit. early UC, or early WF? Also told they have same bolt pattern as F&H HC3, and F&H HC26A wheels. Thanks for any advise. I plan on cleaning them up and sell, and helps if you know what they fit.

Replies:

Posted By: MNLonnie
Date Posted: 21 Feb 2019 at 7:19pm

WC and WF are the only Allis they will fit. They fit Deere AR and BR and Farmall F20 I think.

-------------
Waukesha B, B, IB, G, styled WF, D17, 615 backhoe, M7, 2-Oliver OC3's, 5 Ford Model T's, 3 Model A Fords, 34 Ford coupe, 57 T-Bird

Posted By: ecclap
Date Posted: 25 Feb 2019 at 9:32pm

The HC46A and the earlier HC46 wheel hubs were designed by F&H for the WC tractors. If you want to get real technical they do share the same 6 7/8" bolt pattern as the Farmall F-20/Regular F&H round spokes bearing the HC26A casting number. The John Deere GP Series, the AR/AO and BR/BO all used a 6 bolt pattern but it was 6 3/4". The Deere hubs were HC3 or HC128A. An Allis or Farmall hub in perfect shape will not fit on the Deere tractors without enlarging a couple holes but most of these F&H hubs have enough wear on them to swap right onto the incorrect tractor. They were never originally engineered to do so.

Posted By: R.L.Smith
Date Posted: 26 Feb 2019 at 11:46am

Thank you for the information.. I was not sure about the green tractor wheels.

Posted By: ac fleet
Date Posted: 26 Feb 2019 at 1:11pm

I know they fit f-20 because I did it!

-------------
http://machinebuildersnetwork.com/