Farm Equipment - Torque of c head

Print Page | Close Window

Torque of c head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158141
Printed Date: 22 Jun 2025 at 8:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Torque of c head

Posted By: Krazy Karl
Subject: Torque of c head
Date Posted: 13 Feb 2019 at 6:23pm

Just curious what best method you guys do. I Installed the head torqued to 60 foot lbs in stages. Then when i get to that point of running it run till operating temp and re-torque if reading book correctly

Replies:

Posted By: Jim.ME
Date Posted: 14 Feb 2019 at 5:34am

You should be good proceeding as you describe. Re-torque is just go around them at 60 ft.lbs.

Posted By: Gerald J.
Date Posted: 14 Feb 2019 at 7:52am

Head torquing details are in the shop manual. There is a sequence and the torque.
http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf" rel="nofollow - http://geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf

Gerald J.