Shops, Barns, Varmints, and Trucks

Print Page | Close Window

engine parts

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=158140
Printed Date: 06 May 2024 at 7:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: engine parts

Posted By: LeonR2013
Subject: engine parts
Date Posted: 13 Feb 2019 at 6:20pm

Do any of you know where the best place to buy engine overhaul kits for a Massey Ferguson? A Friend of mine wants me to overhaul his tractor and not being familiar with their parts sources I could use a little help. Thanks guys. Leon

Replies:

Posted By: john(MI)
Date Posted: 14 Feb 2019 at 12:30am

Not that I use them, cause I think they are a little over priced, but Steiners might have what you need. https://www.steinertractor.com/" rel="nofollow - https://www.steinertractor.com/

You could also go to that forum over at Yesterdaystractors.com

https://www.yesterdaystractors.com/mf/wwwboard1.html" rel="nofollow - https://www.yesterdaystractors.com/mf/wwwboard1.html

-------------
D14, D17, 5020, 612H, CASE 446

Posted By: Thad in AR.
Date Posted: 14 Feb 2019 at 4:27am

Gas or Diesel? What tractor? Monte’s if it’s a Continental.
Like John says that other site might have what you need. I go there anytime I have to mess with anything non Allis.

Posted By: Fred in Pa
Date Posted: 15 Feb 2019 at 11:28am

I am a Reliance Dealer U can call me from 8 am to 6 pm eastern time .

# at shop 717-632-9022

I use these kits in 85 % of rebuilds I do.

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.

Posted By: Stan IL&TN
Date Posted: 15 Feb 2019 at 1:49pm

AGCO maybe?

-------------
1957 WD45 dad's first AC

1968 one-seventy

1956 F40 Ferguson

Posted By: LeonR2013
Date Posted: 15 Feb 2019 at 7:09pm

Dang, I forgot to add that it is a Perkins Diesel. I think it's a four cylinder but I haven't seen it up close. Plans are to start on it in the spring. Thanks for the get back guys. After all it is owned be Agco. Leon

Posted By: Bill_MN
Date Posted: 15 Feb 2019 at 7:46pm

Probably have the best luck getting parts from the UK, try messaging Mark Everett

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow

Posted By: LeonR2013
Date Posted: 16 Feb 2019 at 3:31pm

Thanks Fred. I'll try to touch base with you next week. Thanks Bill for getting back to me. If Fred can't help me I'll try Mark Everett. A friend of mine got his from Lauf Equipment but he thought they were kinda high, but maybe not. Things are going to have to warm up around here before I start on it. Too dang cold around here for this old man. At least it's inside, but no heat. Thanks again. Leon

Posted By: Bill_MN
Date Posted: 16 Feb 2019 at 4:02pm

Fred is good friends with Everetts so between the two of them should be able to fix you up.

-------------
1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow