200 seat
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157416
Printed Date: 23 May 2025 at 8:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 200 seat
Posted By: acplowboy45
Subject: 200 seat
Date Posted: 20 Jan 2019 at 7:15am
| What seat did the 200's have on them the 3 piece seat or the black seat with the flip up arms. Where the best place to get one. |
Replies:
Posted By: DrAllis
Date Posted: 20 Jan 2019 at 7:27am
| They used two different black seats. What age or serial number is the tractor ?? |
Posted By: acplowboy45
Date Posted: 20 Jan 2019 at 11:33am
| It's a 1975 |
Posted By: DougG
Date Posted: 20 Jan 2019 at 12:17pm
| Tractor Supply has got some nice ones |
Posted By: HD6GTOM
Date Posted: 20 Jan 2019 at 1:38pm
| My late one has the black seat with the flip ups. |
Posted By: Lonn
Date Posted: 20 Jan 2019 at 6:23pm
|
My '75 has the black with flip up arm rests. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Mikez
Date Posted: 20 Jan 2019 at 8:44pm
| How much do you want to spend. A fellow forum member tipped me off to a seat that's made for logging equipment and is almost identical to the original |
Posted By: JWV Fulton
Date Posted: 22 Jan 2019 at 9:09am
| Go to http://www.tractorseats.com" rel="nofollow - www.tractorseats.com and you should find what you need. |
Posted By: WF owner
Date Posted: 22 Jan 2019 at 1:03pm
They have a lot of nice seats that are a lot like the original, but not quite... |
JWV Fulton wrote:Posted By: KJCHRIS
Date Posted: 22 Jan 2019 at 11:09pm
|
IF memory is good today; the early black seats are the ones where the arm rests attach to a stud sticking out each side of the back rest. Later seats have a bracket for the arm rests that bolts (using 2 of 5/16" bolts) to the irons coming up to hold back rest. Arm rests are the same for both seats. AGCO has them in the Heritage Parts catalog. Backs n seats are available thru most ( several on this site) vendors dealing in seats. If you need to redo the suspension DJ's has most of what you need, have the lever/arm now, also the pins and bushings, the 4 plastic wheels for the slide are getting hard to find. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: dansig1
Date Posted: 21 Feb 2019 at 10:08am
| Can you tell me where I can get this seat and how much? Thanks. I'm referring to Mikez post. |
Posted By: Leadoff
Date Posted: 21 Feb 2019 at 4:45pm
|
Dansig1, Serco Loaders, a supplier of forestry industry equipment, uses the seats on their loaders. Their dealers carry replacement seats. Check the Internet for your nearest dealer for availability/price. I purchased a seat for my 1975 185 several years ago. As far as I'm concerned, the seat is an exact match to the factory issue from Allis Chalmers in appearance, quality, dimensions and comfort etc. Milsco (Milwaukee Seat Co) supplies the seat to Serco, and AC back in the mid/late 1970's. Pictures, discussion, more information etc are available in an earlier thread started by Forum Member MikeZ on April 21, 2017, title Seat in 200 Good luck with your project ------------- 1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow |
Posted By: WF owner
Date Posted: 25 Feb 2019 at 7:12pm
|
I just got an email from DJ's and they have this seat. I'm sure it's not the same as original, but that's what the are listing for it. https://stores.djstractorparts.com/allis-chalmers-comfort-classic-seat-assembly/" rel="nofollow - https://stores.djstractorparts.com/allis-chalmers-comfort-classic-seat-assembly/
|
Posted By: dansig1
Date Posted: 27 Feb 2019 at 3:07pm
| Thanks for the replies! Now I am wondering if a 200 seat will bolt onto a 190xt suspension or do I need to get the 200 suspension? Will the 200 suspension bolt to the 190xt fuel tank? |
Posted By: Leadoff
Date Posted: 27 Feb 2019 at 6:20pm
|
Dansig1 From the online AGCO Parts Book the 190 (page 192) and 200 (page 132) have common seat assembly support connections to the fuel tank for older serial number tractors (part no 70241895 - seat support). Later serial no 200 tractors (page 134) had a newer seat assembly setup. The assembly shown on page 134 for the 200 is what is required to support the Milsco seat noted in my earlier post. The year/serial no of your 200 should help you determine what seat will fit your tractor. Also, based on the common part/attachment to the fuel tank for the seat assembly for the older 190/200 models noted above, there is probably a way you can mount the Milsco seat on a 190 with a few seat support/suspension components from a donor 200. Hope this helps ------------- 1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow |