720 Allis Chalmers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157399
Printed Date: 25 Apr 2024 at 12:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 720 Allis Chalmers
Posted By: Mike K
Subject: 720 Allis Chalmers
Date Posted: 19 Jan 2019 at 11:47am
|
I am about to change fluid in my 720. I need to locate the drain plug for the hdy. I have the filter. How much fluid do I need to have to replace it with, and the correct type Thanks Mike
|
Replies:
Posted By: IBWD MIke
Date Posted: 19 Jan 2019 at 1:14pm
|
I'll be watching this. Bought the filter to change mine last summer, never found the plug! |
Posted By: AC720Man
Date Posted: 19 Jan 2019 at 2:09pm
|
There is no true drain plug. Remove the transmission temp sensor located in the lower front of the hydro. Bottom pan has to be removed if it hasn’t already removed. Lots of dirt, mice nests typically there. Fluid amount and type is located on the sticker located under the hood. Easy job. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Acdiesel
Date Posted: 19 Jan 2019 at 2:17pm
see post is garden section ------------- D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf D15 SER.2 DIESEL,D15 ser.II nf D12 SER.I, D10 Ser.II 2-720'S Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |