HD6B wet clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157027
Printed Date: 19 May 2025 at 9:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6B wet clutch
Posted By: rhead
Subject: HD6B wet clutch
Date Posted: 08 Jan 2019 at 5:56am
|
I have recently aquired a HD6B for my farm.... has a wet clutch. Needs camshafts replaced. Not sure what caused the failure or wether or not the compete clutch should be changed. Either way I am having difficulty locating any parts. The part number is 638652. The complete clutch assembly is PN 644218. Or possibly PN 639210. The engine runs great and I am told that the rest of the machine works and was taken great care of by the previous owner. By the looks of the machine it seems that he is being honest about that. Very clean. Im hopeful that I have not just purchased the biggest paperweight I’ve ever owned!!! I have read a few posts by Gemdozer here and on other sites that he might have a wet clutch removed from a parted out machine.
|
Replies:
Posted By: rhead
Date Posted: 08 Jan 2019 at 5:59am
|
Also, if anyone out there knows of other machines that would have used this particular clutch that would be helpful in my search. Thanks in advance!
|
Posted By: truckerfarmer
Date Posted: 08 Jan 2019 at 6:40am
Try General Gear. I got a new clutch and pressure plate for my HD5B shipped to my door for around $250.
-------------
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer
Duct tape.... Can't fix stupidity. But will muffle the sound of it!
|
Posted By: gemdozer
Date Posted: 08 Jan 2019 at 10:18am
|
I check tomorrow if am still have some cluch camshafts for HD6
|
Posted By: rhead
Date Posted: 08 Jan 2019 at 11:01am
Posted By: gemdozer
Date Posted: 09 Jan 2019 at 4:01pm
|
I am sorry the cluch camshaft ben solded
|
Posted By: rhead
Date Posted: 10 Jan 2019 at 3:05pm
|
Now looking for a complete assembly. Just think I will be better off in the long run. Anyone parting out a HD6B or HD6g? Please contact me!!
|
Posted By: gemdozer
Date Posted: 10 Jan 2019 at 5:19pm
|
You better keep the wet cluch
|
Posted By: rhead
Date Posted: 11 Jan 2019 at 5:38am
|
Yes the wet clutch. I think I have one lined up but haven’t seen it yet. If anyone knows of one please let me know. Also, the engine driven oil pump. I believe the hd6E had them and the M100 B motor grader. Mounts on the left side of the engine under the fuel injector pump.
|
|